Carburetor Model R S T

This OEM Suzuki RING part (Part No. 13382-42A00) is a direct replacement component designed for optimal compatibility with compatible Suzuki models. Engineered to meet or exceed original equipment manufacturer (OEM) specifications, it ensures reliable performance and durability in demanding automotive applications.

Constructed from high-quality materials, this ring is manufactured with precision to maintain precise tolerances and fitment. It is recommended for use in routine maintenance or repair scenarios where OEM standards are required. The part is new, unused, and packaged in manufacturer-approved conditions for immediate installation.

This Genuine Suzuki Needle Jet Ring (Part #13387-47010) is a precision-engineered component designed for optimal carburetor performance. Manufactured to Suzuki's strict quality standards, it ensures precise fuel-air mixture calibration for smooth engine operation.

Constructed from durable, corrosion-resistant material, this needle jet ring maintains dimensional stability under high-temperature conditions. It is an essential replacement part for compatible Suzuki models requiring exact fitment and reliable functionality. Engineered for longevity, it delivers consistent performance in demanding automotive applications.

The Suzuki Plug Drain part number 13247-02340 is a genuine OEM component designed for precise integration within Suzuki vehicle drainage systems. Manufactured to meet original equipment specifications, this plug ensures reliable sealing and fluid management.

Constructed from durable materials, the part offers long‑term resistance to corrosion and wear, supporting optimal performance in demanding automotive environments. It is suitable for direct replacement of the original factory-installed unit, facilitating straightforward installation and maintaining the vehicle's warranty compliance.

Suzuki OEM Part 02112-05127 SCREW

The OEM carburetor float‑bowl gasket is engineered for precise fitment on Suzuki DR650, GS500, and GSXR models. Constructed from high‑temperature resistant material, the gasket provides a reliable seal between the carburetor float bowl and the carb housing, preventing fuel leakage and ensuring optimal engine performance.

Designed to meet or exceed original equipment specifications, this gasket maintains consistent fuel flow and supports stable idle and throttle response. Installation requires removal of the carburetor float bowl; the gasket replaces the factory seal without modification to existing components.

Each unit is inspected for dimensional accuracy and material integrity before packaging. The part number 13258-44B00 corresponds directly to Suzuki OEM documentation, guaranteeing compatibility and ease of replacement for service technicians and DIY enthusiasts alike.

Suzuki OEM Carburetor Float Valve Needle O-Ring 13374-46710 Bandit GSX-R DR350

This NOS OEM Main Jet, part number 09491-25011, is designed for precise fuel delivery in Suzuki TS250, TS400, and GSX-R750 models. Engineered to meet OEM specifications, it ensures optimal engine performance by maintaining correct air-fuel ratios for various operating conditions.

Constructed from high-quality materials, this main jet is a direct replacement for stock components, providing reliable functionality and durability. The jet is calibrated for 127.5 metric size, making it suitable for applications requiring precise fuel metering. Each package includes one jet, ensuring compatibility and ease of installation for professional or DIY maintenance.

Suzuki OEM 13374-35C00 Needle Valve O-Ring New

Suzuki OEM Part 13268-31210 is a genuine throttle stop screw designed for precise throttle control in compatible Suzuki models. Manufactured to original equipment manufacturer specifications, this spring-loaded component ensures consistent idle and throttle response by maintaining optimal tension on the throttle stop mechanism.

Engineered for durability and reliability, the throttle stop screw features a high-quality steel construction with corrosion-resistant coating. The spring provides consistent resistance, allowing for smooth adjustment of throttle positioning. This OEM replacement part guarantees seamless integration with Suzuki engines, maintaining factory performance standards without compromise.

The OEM Suzuki Washer model 13615-43010 is engineered to provide a reliable sealing solution for a range of Suzuki applications. Constructed from high‑grade steel, this washer delivers superior tensile strength and resistance to corrosion, ensuring long‑term performance under demanding operating conditions.

Designed to meet original equipment manufacturer specifications, the part integrates seamlessly with compatible Suzuki assemblies, reducing installation time and eliminating the need for additional modifications. Its precision‑machined surface finish promotes uniform load distribution, minimizing the risk of deformation and extending the service life of the surrounding components.

Each unit undergoes rigorous quality control testing to verify compliance with industry standards. The OEM Suzuki Washer 13615-43010 is supplied individually, packaged to protect against damage during transit, and is backed by a comprehensive warranty for added customer confidence.

Genuine OEM Suzuki screw assembly for precise fitment in DR650, RF900, DR350, GSXR1100, and GSX750 models. This NOS (New Old Stock) hardware is designed to meet original manufacturer specifications, ensuring reliable performance and compatibility with Suzuki motorcycle applications.

Manufactured to stringent OEM standards, the screw set includes part numbers 02112-7516A and 37574-49440 for accurate identification and traceability. Engineered for durability, these screws are ideal for restoration projects, maintenance, or replacement of worn components in compatible Suzuki models.

This genuine Suzuki pilot jet, part number 09492-35010, is an original equipment manufacturer (OEM) component designed for select vintage Suzuki motorcycle models. Precision-engineered to exacting Suzuki standards, this pilot jet ensures optimal fuel-air mixture delivery for smooth engine performance in carbureted systems. The component is new old stock (NOS), maintaining factory specifications and compatibility with the following models: GS750E, GS550EF, GS500E, GS550L, and GS700E. Each pilot jet undergoes rigorous quality control to meet Suzuki’s original design tolerances, guaranteeing reliable operation in OEM applications.

Constructed from corrosion-resistant materials, this pilot jet is designed for durability and long-term performance. Its compact dimensions (11.0mm length, 3.5mm diameter) allow for precise installation in the carburetor assembly, while the threaded design ensures secure fitment. Compatible with carburetor models applicable to the listed Suzuki motorcycles, this pilot jet is an essential replacement part for maintaining factory engine tuning and fuel efficiency. Suitable for restoration projects or routine maintenance, this NOS part provides a cost-effective solution without compromising on original equipment quality.

Suzuki FUEL HOSE CLAMP 09401-10401 OEM NEW

The Suzuki Screw Pilot 13279-47070 is an original equipment manufacturer (OEM) component designed for precise installation and reliable performance in Suzuki applications. Engineered to meet Suzuki's stringent quality standards, this new part ensures optimal torque transmission and durability.

Constructed from high‑strength materials, the screw pilot provides accurate alignment and secure fastening for critical assemblies. It is a direct replacement for the OEM specification, guaranteeing compatibility and seamless integration without the need for modifications.

The Suzuki Washer model 13291-29900 delivers reliable performance for demanding cleaning applications. Engineered with robust components, it provides consistent operation and durability in industrial environments.

Designed for ease of integration, this unit features a compact footprint and straightforward maintenance access, ensuring minimal downtime. Its construction complies with applicable safety standards, offering users confidence in continuous operation.

New Genuine OEM SUZUKI O-Ring 13295-29900 13295-29901

This Suzuki OEM Drain Screw (Part Number 13247-32210) is designed for precise fitment and reliable performance in select Suzuki models. Constructed from durable steel, the screw ensures long-lasting use under standard operating conditions.

Engineered to maintain optimal fluid drainage, this component meets Suzuki's strict OEM specifications for quality and compatibility. Ideal for applications requiring precise torque specifications and secure fastening.

This genuine SUZUKI drain plug gasket, part number 13249-41310, ensures a reliable and leak-free seal for oil pan drain plugs. Engineered to meet OEM specifications, it provides precise fitment and long-lasting durability for SUZUKI engines. The gasket is designed to withstand high temperatures and pressures, maintaining optimal performance in demanding operating conditions.

Constructed from high-quality materials, this drain plug gasket delivers consistent sealing performance and prevents oil leaks. It is suitable for a wide range of SUZUKI models requiring this specific gasket. For optimal engine maintenance, always use genuine OEM parts to guarantee compatibility and reliability.

This original equipment manufacturer (OEM) brake hose is designed for precise fitment on Suzuki RM80, DR250, DR350, JR50, JR80, and DS80 models. Manufactured to OEM specifications, it ensures reliable hydraulic performance and compatibility with the vehicle's braking system.

The hose measures 3mm in inner diameter, 5mm in outer diameter, and has a total length of 600mm. Part number 09352-30503-600 guarantees exact replacement for the original component, maintaining optimal brake fluid flow and pressure integrity. This brake hose is constructed with high-quality materials to resist wear, abrasion, and environmental degradation, providing long-lasting durability in demanding riding conditions.

This set includes eight OEM-grade screws, part number 02112-05087, engineered for compatibility with select Suzuki models. Designed for precise fitment and durability, these screws are ideal for maintenance, repairs, or assembly of compatible motorcycles produced between 1972 and 1998.

The screws meet Suzuki's stringent quality standards, ensuring reliable performance in critical applications. Suitable for use with the DR350SE, GSX-R1100, and TS400, these components provide a secure and long-lasting solution for fastening needs in high-vibration environments.

Genuine OEM Suzuki Valve Assy, Check Part 13520-02C01 ensures optimal engine performance and reliability for compatible Suzuki models. Engineered to original equipment manufacturer standards, this valve assembly is designed for precise fitment and seamless operation.

Constructed from high-grade materials, the valve assembly provides durable service life with consistent pressure regulation. Compatible with specified Suzuki engines, it maintains proper air and fuel flow dynamics, contributing to efficient combustion and reduced emissions.

This OEM Suzuki hose, part number 44420-44AR0, is a high-quality replacement component designed for precise fitment and reliable performance in compatible Suzuki vehicles. Engineered to meet or exceed original equipment manufacturer (OEM) specifications, this hose ensures optimal fluid flow and system integrity for critical applications.

Constructed from durable, heat-resistant materials, the hose features dimensions of 5mm inner diameter × 8.2mm outer diameter × 600mm length, providing a secure fit and leak-free operation. Its precision-engineered design and construction make it an ideal choice for maintenance, repair, or replacement needs in your Suzuki vehicle.

These genuine Suzuki wiring clamps are original equipment manufacturer (OEM) components designed for precise fit and reliable performance. Identified by part number 09404-06432, the clamps provide secure cable routing and protection within Suzuki vehicle electrical systems.

Constructed from high‑quality materials, the clamps ensure durability under vibration and temperature variations. They are supplied as a quantity of two (QTY2) and are suitable for direct replacement of worn or damaged original parts, maintaining factory specifications and safety standards.

The Suzuki CLAMP 09404-06429 is an original equipment manufacturer (OEM) component designed for precise fit and reliable performance on compatible Suzuki models. Constructed with high‑quality materials, this clamp ensures secure fastening and durability under normal operating conditions.

Engineered to meet Suzuki's stringent standards, the part integrates seamlessly during installation, providing a professional finish without the need for modifications. Ideal for service professionals and discerning DIY enthusiasts seeking authentic replacement parts.