Front Wheel Gs750ec

The Suzuki GS-1100E and GS-750E front wheel assembly ensures reliable performance and precise handling for optimal riding stability. This replacement part is designed to meet OEM specifications, guaranteeing seamless fitment and durability in demanding riding conditions.

Constructed from high-strength materials, the assembly features a 21-inch wheel diameter with a 1.60-inch rim width, paired with a tubeless tire rated for a maximum load capacity of 355 lbs (161 kg). The hub assembly includes a 6210ZZ sealed ball bearing with an inner diameter of 50 mm and an outer diameter of 90 mm. Compatible with Suzuki models GS-1100E and GS-750E, this part is identified by the OEM part number 54111-49350-291.

This high-quality wheel bearing (Part No. 08123-63027) is designed for the front wheel assembly of select Suzuki motorcycle models, including the GS1150, GS1100, DR200, GN400, and GR650. Engineered for durability and smooth operation, it ensures reliable performance under demanding riding conditions.

Precision-manufactured to OEM specifications, this bearing features a sealed design to protect against contamination and extend service life. Compatible with the specified Suzuki models, it delivers consistent wheel rotation with minimal friction, enhancing overall ride quality and safety.

This genuine Suzuki spacer, part number 54730-18400, is designed for precise compatibility with compatible hub bearing assemblies in select Suzuki models. Machined from high-grade materials, it ensures optimal fitment and durability, meeting Suzuki's stringent OEM quality standards.

The spacer features a smooth, precision-ground surface for seamless integration with the hub bearing assembly, reducing vibration and maintaining alignment. It is an essential component for wheel hub service, ensuring proper axial spacing and preventing premature wear. This new old stock (NOS) item guarantees original manufacturer specifications for reliable performance.

Genuine OEM front axle assembly designed for 1975-1985 Suzuki GS RE5 motorcycles. Each unit is precision-engineered to meet original equipment manufacturer specifications, ensuring optimal fitment and reliable performance for your classic bike.

This replacement axle carries the part numbers 54711-3300V and 54711-33002, confirming compatibility with the Suzuki GS RE5 model range produced during the specified years. Constructed from high-grade steel for durability and corrosion resistance, it maintains proper wheel alignment while supporting smooth front-end handling.

This genuine Suzuki OEM cotter pin set includes parts numbers 04111-3030A and 04111-30308, designed for use with the Suzuki AS100 Wolf and AC100 models. Engineered to meet original equipment manufacturer specifications, these pins provide reliable retention for critical fasteners in motorcycle suspension and steering assemblies.

Constructed from high-grade steel, these cotter pins feature a corrosion-resistant finish to ensure long-lasting performance in demanding riding conditions. Each set includes two pins, ensuring an exact match for replacement requirements. These OEM components are ideal for precision repairs and maintaining factory specifications.

This OEM Suzuki front wheel spacer, part number 54740-18402, is precision-engineered to fit multiple GS-series models, including the Suzuki GT 250, 380, 500, 550, 750, and 1000. Manufactured to strict OEM standards, the spacer ensures proper wheel alignment and hub compatibility, maintaining factory-level performance and safety.

Constructed from high-grade aluminum with a durable black anodized finish, this spacer is designed for durability and corrosion resistance. The part integrates seamlessly with the existing wheel assembly, providing a precise fitment without modifications. Compatible with both NOS and replacement Suzuki wheels, it is an ideal solution for restoration projects or routine maintenance.

This high-quality front wheel spacer is designed for Suzuki GT750, GT550, GT500, GT380, and GT250 models. Precision-engineered to maintain proper wheel alignment and clearance, it ensures safe and reliable operation while accommodating larger wheels or aftermarket components.

Constructed from durable aircraft-grade aluminum for superior strength and corrosion resistance, this spacer features a 150.34mm outer diameter and is compatible with the specified Suzuki models. The design incorporates precise machining for optimal fitment and performance.

These NOS (New Old Stock) Genuine Suzuki Motorcycle Factory Hardware Washers are precision OEM parts designed to meet exacting manufacturing standards. Each washer is manufactured to Suzuki’s original specifications, ensuring optimal fit, function, and durability for compatible motorcycle models. These washers are intended for use in critical assembly points where a secure, reliable seal is required to maintain structural integrity and prevent loosening over time.

Each package contains two washers, designated by the part number 08322-01127. These genuine OEM components are ideal for routine maintenance, aftermarket repairs, or restoration projects, providing a direct OE replacement solution. Installation requires no special tools beyond standard hardware equipment.

This genuine Suzuki speedometer box, part number 54600-18402, is engineered for precise compatibility with select Suzuki motorcycle models. Designed as an original equipment manufacturer (OEM) component, it ensures accurate speedometer readings and reliable performance in GS1000, GS1100, GT550, and GT500 models.

Manufactured to Suzuki's stringent quality standards, the speedometer box integrates seamlessly with the motorcycle's electrical system. It features durable construction for long-term durability and maintains factory specifications for consistent functionality. Ideal for repairs, replacements, or restoration projects, this OEM part guarantees a proper fit and optimal operation.

The SUZUKI 09100-08140 BOLT NOS New XS8165 is an OEM-grade Nitrous Oxide System designed for optimal performance in compatible Suzuki BOLT models. This factory-calibrated kit ensures seamless integration with the vehicle's engine management system, delivering precise fuel and nitrous delivery for consistent power gains. The system includes a high-flow nitrous bottle, stainless steel lines, and a dedicated solenoid for reliable activation.

Constructed from corrosion-resistant materials, the XS8165 kit is engineered for durability under high-performance conditions. Installation requires basic mechanical knowledge and standard automotive tools, with no additional tuning necessary for stock vehicles. This NOS system is a direct replacement part, maintaining OEM fitment and factory safety standards.

This genuine Suzuki GSX1100 Katana disc tab washer, part number 09169-08016, ensures precise fitment and reliable performance for GSX1100 and GSX550 Katana models. Crafted from high-quality materials, the washer provides a secure seal to prevent fluid leaks while maintaining optimal brake system integrity.

Designed as an OEM replacement, it meets Suzuki's stringent engineering standards for durability and compatibility. Installation requires no modifications, ensuring a direct replacement solution for maintenance or repair tasks. The part number GS1000 is also referenced for cross-referencing in parts catalogs.

This genuine Suzuki front wheel tube assembly inner component, part number 55200-44610, is designed for the LS650 Savage model. Engineered to meet OEM specifications, the assembly ensures precise fitment and reliable performance for your motorcycle’s front wheel system.

The inner wheel tube assembly features a durable construction compatible with the LS650’s front wheel assembly. It maintains proper tire pressure while supporting smooth rotation and handling. This replacement part is ideal for addressing wear or damage to the inner wheel tube, restoring optimal functionality to your motorcycle’s front wheel setup.

This genuine Suzuki balancer part, part number 55411-47001, is designed for compatibility with select Suzuki models including the GN125, GS55, GS450, GS1100, and GS750. Manufactured by Suzuki as an Original Equipment Manufacturer (OEM) component, it ensures precise fitment and reliable performance for engine balancing applications.

The balancer operates as a critical component in the engine's rotational dynamics, mitigating vibrations and improving overall drivetrain smoothness. This new old stock (NOS) part maintains factory specifications, providing durability and operational consistency. Ideal for restoration projects or routine maintenance, it is a direct replacement for the original equipment.