Propeller Shaft Final Drive Gear

The Suzuki OEM Part 09160-14021 WAYHER is a genuine component designed to meet the original equipment manufacturer standards for Suzuki vehicles. Precision engineering ensures compatibility and reliable performance within the specified application.

Constructed from high‑quality materials, this part provides durability and resistance to wear under typical operating conditions. Installation follows standard procedures for Suzuki models, facilitating straightforward replacement and maintenance.

This genuine Suzuki OEM part, bearing the part number 09159-14010, is designed to secure the rear propeller shaft coupling on compatible Suzuki models. Manufactured to exacting OEM specifications, it ensures precise fitment and reliable performance for long-term durability.

The nut features a robust threaded design, optimized for high-torque applications to prevent loosening under operational stress. Constructed from durable steel with a corrosion-resistant finish, it meets Suzuki's stringent quality standards for resistance to wear and environmental degradation.

The Suzuki OEM Part 09247-18001 Oil Gallery Plug is engineered for precise compatibility with Suzuki engine models requiring this specific component. Constructed from high‑grade materials, it delivers reliable sealing performance under demanding operating conditions, ensuring optimal oil containment and engine protection.

This plug is designed for straightforward installation, featuring a standard threading profile that aligns with Suzuki’s oil gallery specifications. The product complies with Suzuki OEM standards, guaranteeing a fit that matches original equipment quality and durability. It is suitable for routine maintenance and replacement procedures where integrity of the oil gallery is critical.

The OEM front fork damper O‑ring (part number 09280-18004) is engineered specifically for Suzuki Boulevard motorcycles produced between 2005 and 2011. Designed to restore the original sealing performance of the M50 suspension system, this component ensures consistent damping characteristics and protects internal hydraulic fluid from contamination.

Each package contains four precision‑molded O‑rings, matching the exact dimensions and material composition specified by Suzuki. Installation requires removal of the front fork damper assembly, replacement of the existing seal, and re‑assembly according to the manufacturer’s service guidelines. The O‑ring provides reliable elasticity and resistance to wear, contributing to optimal ride stability and handling precision.

These parts are genuine OEM replacements, guaranteeing compatibility with the original equipment and maintaining the warranty standards set by Suzuki. They are suitable for professional mechanics and experienced DIY enthusiasts seeking a dependable solution for front‑fork maintenance on the 2005‑2011 Boulevard M50 model.

This NOS Drive Gear Bearing Shim is precision-engineered for compatibility with select Suzuki models, including the LTF300, GS650, LTF500, and VS800. The shim is designed to ensure optimal bearing alignment and reduce vibration, enhancing drivetrain reliability and performance. Its durable construction provides long-lasting durability under high-stress conditions.

Compatible with OEM part number 27327-34200, this shim maintains precise tolerances to prevent premature wear on drive components. Engineered for ease of installation, it integrates seamlessly with existing assemblies, ensuring a perfect fit for critical power transfer systems.

This OEM Suzuki Driven Gear Bearing Shim is designed for the VX800 and VS700 models produced between 1981 and 2000. It ensures proper spacing and alignment of the driven gear bearing within the transmission assembly.

The shim maintains critical tolerances to prevent premature wear or misalignment, contributing to the longevity and smooth operation of the drivetrain components. Compatible with the specified model years, it meets original equipment manufacturer (OEM) quality standards for reliable performance.

This OEM Suzuki Driven Gear Bearing Shim is a genuine NOS (New Old Stock) part designed for models manufactured between 1981 and 2000, including the LT-4WD and VS750 series. Engineered to exacting OEM specifications, this shim ensures precise fitment and optimal performance in the driven gear assembly, maintaining proper preload and reducing wear on adjacent components.

Constructed from high-quality steel for durability and corrosion resistance, the shim features a thickness of 0.012 inches (0.30 mm) and a diameter of 1.26 inches (32 mm). Compatible with part number 27327-34220, this shim is an essential replacement for maintaining original equipment specifications in Suzuki drivetrain applications.

This NOS (New Old Stock) Suzuki OEM Driven Gear Bearing Shim is manufactured by Suzuki and designated with part number 27327-34230. Designed for precise fitment, this shim ensures optimal performance and durability in compatible Suzuki models.

Compatible with the 1998-2000 LT-F500 and 1990-1993 VX800, this bearing shim maintains precise clearance between components, reducing wear and extending the lifespan of the driven gear assembly. Engineered to original equipment manufacturer standards, it guarantees a seamless replacement for worn or damaged shims.

This high-quality nos front wheel bearing is designed for optimal durability and performance in Suzuki vehicles. Engineered to meet OEM specifications, it ensures smooth rotation and reduced friction for enhanced driving experience.

Manufactured with precision, this bearing is a direct replacement part that guarantees compatibility and reliability. The part number 09265-25013 ensures accurate identification and fitment for supported Suzuki models. Suitable for professional installation in automotive repair and maintenance applications.

This genuine Suzuki O-ring (Part No. 09280-63004) is an OEM factory replacement component designed for precise sealing performance in Suzuki DR370, SP370, GS850, and GS1000 models. Manufactured to Suzuki’s stringent quality standards, this O-ring ensures reliable sealing in critical engine and transmission applications, preventing fluid leakage and maintaining optimal operating conditions.

Constructed from high-grade rubber compounds, the O-ring delivers superior resistance to heat, oil, and compression set, ensuring long-lasting durability even under demanding conditions. Its precise dimensions and material composition are engineered to meet or exceed original equipment specifications, providing a seamless fit and eliminating the risk of premature failure. Ideal for restoration projects, routine maintenance, or performance upgrades, this O-ring guarantees consistent performance and reliability.

This is a genuine OEM replacement spark plug designed specifically for select Suzuki motorcycle models. Manufactured to exacting Suzuki standards, the plug ensures reliable ignition performance and engine efficiency in compatible GS-series motorcycles, including the GS1100, GS850, and GS1000.

The plug features the part number 09247-14019, confirming its authenticity and suitability for direct replacement in original equipment applications. Precision-engineered to meet high-quality manufacturing specifications, this spark plug delivers consistent firing and contributes to optimal combustion for improved engine operation.

The Suzuki O Ring OEM 09280-24006 is a genuine manufacturer replacement part designed for precise sealing applications in compatible Suzuki vehicles. This new, OEM-grade o-ring ensures optimal performance and prevents fluid leaks in critical engine and transmission components.

Manufactured to exacting Suzuki specifications, the 09280-24006 o-ring delivers superior durability and resistance to high-pressure environments. It is constructed from high-quality rubber compounds to maintain elasticity and structural integrity under demanding operating conditions.

The Suzuki OEM O‑Ring part number 09280‑16005 is engineered to meet the exacting standards of original equipment manufacturers. Constructed from high‑grade elastomer, this sealing component provides reliable resistance to wear, temperature fluctuations, and chemical exposure, ensuring consistent performance in demanding automotive applications.

Key dimensions include an outer diameter of 2.4 mm and an inner diameter of 15.8 mm, delivering a precise fit for the designated sealing locations within Suzuki power‑train and chassis systems. The O‑Ring’s tolerances are maintained to OEM specifications, facilitating seamless integration during maintenance, repair, or component replacement procedures.

Designed for professional technicians and service facilities, this part offers dependable sealing integrity, reducing the risk of fluid leakage and contributing to the overall reliability of the vehicle. It is supplied as a single unit, ready for immediate installation in accordance with Suzuki service guidelines.

This genuine Suzuki OEM stud bolt, part number 01421-10308, is engineered for precise fitment in Suzuki RM250, RMX250, TS250, and RM400 models. Manufactured to Suzuki's exacting standards, this high-quality component ensures optimal performance and durability in demanding riding conditions.

Designed as a direct replacement part, the stud bolt maintains the integrity of the motorcycle's assembly while providing reliable fastening for critical components. Its precision threading and robust construction contribute to long-term reliability, making it an essential component for maintenance and repair.

The Suzuki OEM Part 09283-30026 is a precision-engineered seal designed for coupling oil applications. Manufactured to meet original equipment standards, it ensures reliable sealing performance and protects critical drivetrain components from contamination.

Constructed from high‑quality materials, this seal provides consistent durability and resistance to wear under normal operating conditions. It is intended for use as a direct replacement in Suzuki vehicles requiring the specified part number.

Suzuki OEM Part 09381-40003 CIRLIP

This NOS Genuine Suzuki Shim Kit (Part No. 09181-25010) features precision-crafted shims designed for optimal valve clearance adjustment in Suzuki engines. Each shim is manufactured to exacting OEM standards, ensuring precise thickness and durability for long-term performance. The kit includes shims with a thickness of 1.68mm, suitable for applications requiring this specific dimension.

Intended for professional mechanics and enthusiasts, this shim kit provides a reliable solution for maintaining engine efficiency and preventing premature wear. Compatible with select Suzuki models, it delivers exact fitment and consistent performance. Engineered for dependability, this OEM-grade component is backed by Suzuki's rigorous quality control standards.

This NOS genuine OEM shim, part number 09181-25014, is designed for Suzuki GS series motorcycles, including models GS 650, 850, 1000, 1100, GV 700, and 1200. The shim measures 25mm x 30mm x 2mm and meets the exact specifications required for precise valve clearance adjustment in these models. Manufactured to Suzuki’s stringent OEM standards, this shim ensures optimal performance and durability.

Compatible with a wide range of Suzuki GS series motorcycles, this genuine shim provides a perfect fit and reliable operation. Its high-quality construction guarantees consistent thickness and surface finish, reducing the risk of premature wear or misalignment. Ideal for maintenance or replacement, this shim is an essential component for maintaining engine efficiency and longevity in Suzuki GS models.

This NOS Genuine Suzuki Final Drive Assy (Part No. 09181-25013) is an OEM replacement component designed for high-performance compatibility with Suzuki HIM-series ATVs. Engineered to meet original equipment manufacturer specifications, it ensures reliable power transfer from the transmission to the rear axle. The drive assembly features a durable housing and precision-machined components, guaranteeing long-lasting durability in demanding off-road conditions.

Compatible with select Suzuki models, this final drive assembly incorporates a 1.90 gear ratio for optimized torque delivery and improved acceleration response. The unit is factory-sealed and ready for direct installation, eliminating the need for additional break-in periods. Backed by Suzuki's stringent quality control standards, this genuine part delivers consistent performance and maintains system integrity for extended use.

Genuine Suzuki Secondary Drive Gear Shim (Part No. 09181-25012) is an OEM component designed for precise fitment in compatible Suzuki motorcycle models. This shim features a thickness of 1.80 mm, ensuring accurate spacing and alignment between the secondary drive gear components. Manufactured to Suzuki's strict OEM standards, it guarantees consistent performance and durability in demanding operating conditions.

The shim is precision-engineered to maintain proper gear meshing and reduce wear on associated drivetrain components. It is constructed from high-quality materials to provide resistance against deformation and fatigue under load. This replacement part is intended for direct installation, requiring no additional modifications or adjustments when used in applications where this specification is specified by the OEM.

NOS GENUINE SUZUKI SHIM (T:1.70) 09181-25011 is an Original Equipment Manufacturer (OEM) replacement shim designed for precise engine valve clearance adjustment. Manufactured to Suzuki’s strict OEM specifications, this shim ensures optimal performance and longevity in compatible engine models. The shim’s thickness of 1.70 millimeters allows for accurate valve lash adjustment, maintaining proper engine timing and reducing wear on critical components.

This genuine part is constructed from high-grade steel, providing durability and resistance to heat and fatigue. The part number 09181-25011 ensures a direct fit and full compatibility with Suzuki’s engineering standards. Ideal for professional mechanics and DIY enthusiasts, this NOS OEM shim delivers reliable performance without compromising quality or precision.

This NOS Genuine Suzuki OEM part is a precision-engineered shift shaft shim designed for optimal fitment and durability. Featuring a compact 09181-25009 specification, it ensures smooth gear transitions in compatible Suzuki models, including the GS650, GS850, GS1000, GS1100, GV700, and GV1200 series. Engineered to OEM standards, this shim provides reliable clearance adjustment to maintain proper shift linkage alignment.

Constructed from high-quality alloy materials, the shim resists wear and deformation under standard operating conditions. Its precise thickness and dimensions ensure seamless integration with the shift shaft assembly, reducing the risk of play or misalignment. Designed for long-term performance, this genuine Suzuki component is an ideal solution for maintenance or repair applications.

This genuine OEM Suzuki shim, part number 09181-25008, is precision-engineered to meet the exacting standards of Suzuki’s manufacturing specifications. Designed for optimal performance and durability, this shim ensures precise clearance and alignment within critical engine components. The high-quality steel construction provides superior resistance to wear and deformation, maintaining engine efficiency over extended use.

With a thickness of 1.64 mm, this shim is ideal for applications requiring exact dimensional tolerances. Suitable for a wide range of Suzuki models, it is a direct replacement for OEM components, guaranteeing compatibility and reliability. Installation is straightforward, making it a cost-effective solution for maintenance and repair tasks.

Genuine OEM Suzuki shim kit for GS1100, GS850, and GS1000 models, ensuring precise valve clearance and optimal engine performance. This new original part (Part No. 09181-25007) is designed to meet or exceed manufacturer specifications for a perfect fit and reliable operation.

Each kit includes three high-quality shims, providing an economical solution for maintenance or replacement. Engineered for durability and consistent performance, these shims maintain proper valve train clearance to prevent excessive wear and ensure smooth engine function. Ideal for motorcycle servicing and repairs, this shim kit delivers the reliability and precision required for GS-series engines.

Genuine OEM Suzuki shim designed for precise engine valve clearance adjustment. This NOS (New Old Stock) part ensures compatibility with specified Suzuki models, maintaining factory-level precision and performance. The shim features a thickness of 1.60 millimeters, matching OEM specifications for optimal engine function and longevity.

Manufactured to Suzuki's strict quality standards, this shim is part of the original equipment system, providing a reliable solution for valve train maintenance. Suitable for direct replacement in compatible Suzuki engines, it eliminates the need for custom machining while delivering consistent results. Packaged as a single unit for convenience and ease of installation.

The Suzuki GS850/GS1000/GV1200 Final Drive Shaft Oil Seal, bearing OEM part number 09283-32017, is a precision-engineered sealing component designed for optimal performance in the final drive assembly. This oil seal ensures reliable containment of lubricants while preventing contamination from external elements, maintaining system integrity and longevity.

Manufactured to Suzuki's strict OEM specifications, the seal features durable elastomeric construction compatible with high-torque applications. It is an exact replacement for models GS850, GS1000, and GV1200, ensuring proper fitment and seamless integration with the final drive shaft assembly. Ideal for maintenance or repair applications requiring OEM-grade reliability.

This high-quality shim gasket from Suzuki ensures a precise fit and reliable sealing for the drive gear assembly in compatible models. Manufactured to OEM specifications, it delivers consistent performance and durability in demanding riding conditions. The gasket is designed to maintain optimal pressure and prevent fluid leakage between mating surfaces, ensuring smooth operation of the transmission system.

Constructed from reinforced composite materials, this shim gasket is engineered for long-lasting service life and resistance to wear, heat, and chemical degradation. It is a direct replacement part, meeting strict Suzuki quality standards for fit, function, and compatibility. Compatible with Suzuki GS 550, 650, 850, 1100 GV, 700, and 1200 models, this gasket is an essential component for maintenance and repair.

This Original Equipment Manufacturer (OEM) drive housing shim is designed for select Suzuki GS models, providing precise alignment and structural integrity to the transmission housing. Constructed from high-quality steel, this shim ensures a perfect fit and optimal performance, maintaining factory specifications for durability and reliability.

Manufactured with a thickness of 0.20 mm, this shim is specifically engineered for use with the following Suzuki models: GS1000, GS1100, and GS850. Its part number, 27445-45102, guarantees compatibility and seamless integration with OEM components, ensuring consistent operation and reduced wear on transmission parts.

This NOS (New Old Stock) OEM Suzuki Drive Housing Shim, part number 27445-45101, is an authentic replacement component designed for Suzuki GS series motorcycles, including the GS1000, GS1100, and GS850 models. Precision-engineered to match original specifications, this shim ensures proper alignment and clearance within the drive housing assembly, maintaining optimal performance and durability.

The shim is manufactured to OEM standards, guaranteeing a precise fit and reliable function. As a NOS part, it retains original factory specifications, providing a direct replacement solution for worn or damaged components. Ideal for restoration projects or routine maintenance, this drive housing shim helps preserve the integrity of your Suzuki motorcycle’s drivetrain.

This NOS OEM original Suzuki drive housing shim (Part #27445-45100) is a direct-fit replacement component designed for Suzuki GS series motorcycles, including the GS850, GS1000, and GS1100 models. Engineered to precise factory specifications, the shim ensures proper alignment and spacing within the drive housing assembly, maintaining optimal gear mesh and reducing wear on critical components.

The shim is manufactured from high-quality OEM-grade materials, providing durability and consistent performance under demanding operating conditions. As a genuine NOS (New Old Stock) part, it retains the same reliability and fitment as the original equipment, making it an ideal solution for restoration projects, repairs, or routine maintenance.

Suzuki OEM Part 09289-70001 SEAL, FINAL DRIVEN GEAR OIL RH

Suzuki OEM Part 09283-30028 OIL, SEAL

This NOS (New Old Stock) Suzuki bearing is a genuine replacement part designed for select models produced between 1979 and 1985. It is engineered to meet OEM specifications for durability and performance, ensuring reliable operation in high-load applications.

Compatible with the GS850 (1979–1983), GS450 (1982–1983/1985), and GV700 (1985), this bearing features precision-machined components for smooth rotational movement. Manufactured to exacting standards, it restores original equipment functionality without compromise.

Suzuki OEM Part 09263-32007 BEARING, LH (32X46X17.7)

This NOS (New Old Stock) OEM Suzuki Final Drive Gear Shim is engineered for precision alignment in rear drivetrain applications. Designed to fit select GS450, GS650, Katana, and VS750 motorcycle models produced between 1983 and 2000, this shim ensures optimal spacing and smooth gear meshing to prevent premature wear and maintain driveline efficiency.

The shim is manufactured to OEM specifications, featuring durable steel construction for long-term reliability. It is a direct replacement part for the listed models, maintaining factory-fit tolerances to eliminate vibration and reduce noise in the final drive system. This item is ideal for restoration projects, routine maintenance, or replacement of worn components.

This OEM Suzuki Final Drive Gear Shim is precision-engineered for compatibility with select Suzuki models produced between 1981 and 2000. Designed as a direct replacement part, it ensures proper gear alignment and smooth power transmission within the final drive assembly. The shim maintains critical clearance specifications to prevent premature wear of drivetrain components, supporting long-term reliability of the drivetrain system.

Manufactured to meet OEM quality standards, this shim is constructed from durable steel material, offering consistent performance under normal operating conditions. It is an essential component for maintaining drivetrain efficiency in Suzuki GS450, VS700, and VX800 models. Installation requires standard mechanical tools and aligns with Suzuki's specified dimensional tolerances for optimal fitment.

This NOS Suzuki GS650/750 Final Drive Gear Shim Kit includes replacement components designed to ensure proper alignment and spacing within the final drive assembly. Engineered for models GS650 and VS750, this kit is a direct-fit solution for maintaining optimal gear performance and reducing premature wear on drivetrain components.

The shim kit corresponds to part number 27326-34221, ensuring compatibility with Suzuki motorcycles equipped with the specified final drive system. Installation requires standard mechanical tools and follows OEM specifications for precise adjustment. This kit is recommended for service professionals and DIY enthusiasts performing routine maintenance or drivetrain repairs.

Suzuki Oem Nos GS 650 GL G 1981-1983 Final Drive Bearing Retainer 27329-34200

This genuine Suzuki OEM cam dog stopper (Part #22541-34200) is designed for the GN650 model produced between 1981 and 1983. Engineered to precise factory specifications, this component ensures proper valve timing by maintaining camshaft positioning during operation.

Constructed from durable, high-quality materials, the cam dog stopper provides reliable performance and longevity. It is an essential component for maintaining the integrity of the camshaft assembly in GN650 models from the specified years. This part is recommended for routine inspection during maintenance or when replacing related timing components.