Front Wheel Model T

The Suzuki GS-1100E and GS-750E front wheel assembly ensures reliable performance and precise handling for optimal riding stability. This replacement part is designed to meet OEM specifications, guaranteeing seamless fitment and durability in demanding riding conditions.

Constructed from high-strength materials, the assembly features a 21-inch wheel diameter with a 1.60-inch rim width, paired with a tubeless tire rated for a maximum load capacity of 355 lbs (161 kg). The hub assembly includes a 6210ZZ sealed ball bearing with an inner diameter of 50 mm and an outer diameter of 90 mm. Compatible with Suzuki models GS-1100E and GS-750E, this part is identified by the OEM part number 54111-49350-291.

NOS Suzuki GS1150 GS1100 DR200 GN400 GR650 Front Wheel Bearing 08123-63027

The Suzuki GZ250 Front Axle Spacer (OEM Part No. 54711-12FA0) is a precision-engineered component designed for 1999–2010 Suzuki GZ250 models. Crafted to exacting factory specifications, this spacer ensures proper wheel alignment and drivetrain integrity, maintaining optimal performance and handling. Compatible with both the original 54711-12FA0 and equivalent 54730-18400 applications, it delivers a seamless fit without modification.

Constructed from high-strength material, this spacer resists wear and deformation under load, preserving suspension geometry and reducing premature component fatigue. Ideal for restorations, upgrades, or routine maintenance, it adheres to Suzuki’s original engineering standards for durability and reliability. Direct replacement for factory units, ensuring compatibility with stock and aftermarket suspension setups.

Genuine OEM front axle assembly designed for 1975-1985 Suzuki GS RE5 motorcycles. Each unit is precision-engineered to meet original equipment manufacturer specifications, ensuring optimal fitment and reliable performance for your classic bike.

This replacement axle carries the part numbers 54711-3300V and 54711-33002, confirming compatibility with the Suzuki GS RE5 model range produced during the specified years. Constructed from high-grade steel for durability and corrosion resistance, it maintains proper wheel alignment while supporting smooth front-end handling.

Suzuki PIN 04111-3030A OEM NEW

The front wheel axle spacer is engineered specifically for the 1982 Suzuki GS450GA equipped with the Suzukimatic transmission. It provides the precise offset required to align the front wheel assembly with the axle housing, ensuring optimal handling characteristics and maintaining factory‑specified geometry.

Constructed to meet rigorous automotive standards, the component offers durable performance under normal riding conditions. Installation is straightforward, requiring standard tools and follows the original equipment manufacturer’s procedure, allowing for a secure fit without the need for additional modifications. This spacer is an essential replacement part for restoring proper wheel alignment, reducing uneven tire wear, and preserving the stability of the motorcycle during operation.

This high-quality front wheel spacer is designed for Suzuki GT750, GT550, GT500, GT380, and GT250 models. Precision-engineered to maintain proper wheel alignment and clearance, it ensures safe and reliable operation while accommodating larger wheels or aftermarket components.

Constructed from durable aircraft-grade aluminum for superior strength and corrosion resistance, this spacer features a 150.34mm outer diameter and is compatible with the specified Suzuki models. The design incorporates precise machining for optimal fitment and performance.

The genuine Suzuki 08322-01127 washer kit is a precision-engineered OEM replacement for Suzuki motorcycle models requiring exacting wear resistance and dimensional accuracy. This kit consists of two original equipment manufacturer (OEM) washers, manufactured to Suzuki’s exacting specifications for optimal performance and longevity.

Designed for direct fitment, these washers ensure proper sealing and alignment in critical suspension, steering, or drivetrain applications. Compatibility is confirmed for all Suzuki motorcycles requiring part number 08322-01127. Each washer is manufactured from high-quality materials to meet Suzuki’s stringent quality standards, ensuring durability under operational stress.

The Suzuki OEM Part 54871-45000 is a right‑hand cover engineered to replace the original component on applicable Suzuki models. Designed in accordance with factory tolerances, the part provides an exact fit that restores the structural integrity and protective function of the vehicle's bodywork. As a genuine OEM component, it meets all manufacturer quality standards and ensures seamless integration with existing systems.

Constructed from high‑grade material selected for resistance to corrosion, impact, and environmental exposure, the cover delivers long‑term durability under demanding operating conditions. Its precision‑molded geometry facilitates straightforward installation, reducing assembly time while maintaining alignment with mounting points and sealing interfaces. Utilization of this authentic part guarantees reliable performance, preserves resale value, and supports compliance with warranty requirements.

The part is supplied individually, packaged to protect against damage during transit, and accompanied by the necessary documentation for verification of authenticity. Customers seeking to maintain the original aesthetic and functional characteristics of their Suzuki vehicle will find this right‑hand cover to be the optimal replacement solution, delivering both OEM fidelity and peace of mind.

The Genuine OEM Suzuki GS450GA Front Brake Rotor (Part No. 59211-45200) ensures precise fitment and reliable braking performance for your classic motorcycle. Designed to meet Suzuki's strict quality standards, this rotor provides consistent stopping power and durability in demanding riding conditions. Compatible with the 1982 Suzuki GS450GA model, it maintains original equipment manufacturer specifications for optimal safety and performance.

Manufactured with high-grade materials, this brake rotor features a durable construction to withstand heat and friction. The direct replacement ensures seamless installation without modifications, preserving the integrity of your motorcycle's braking system. Ideal for restoration projects or routine maintenance, this OEM part guarantees compatibility and longevity.

This **OEM Suzuki 09100-08140 Front Wheel Bolt** is designed for precise fitment on **1977–1983 Suzuki models**, ensuring compatibility with factory specifications. Manufactured to strict automotive standards, it delivers reliable performance and durability under dynamic wheel loads. The bolt features a **threaded shank** for secure engagement with wheel hub components, while its **hex head** allows for controlled torque application during installation.

Ideal for restorative projects, maintenance, or replacement needs, this genuine part maintains the original design integrity of your vehicle. Compatible with front wheel assemblies requiring a **M12 x 1.25 thread pitch** and **55mm length**, it supports proper wheel alignment and load distribution. For optimal results, use with the recommended torque specifications provided in your vehicle’s service manual.

This genuine Suzuki GSX1100 Katana disc tab washer, part number 09169-08016, ensures precise fitment and reliable performance for GSX1100 and GSX550 Katana models. Crafted from high-quality materials, the washer provides a secure seal to prevent fluid leaks while maintaining optimal brake system integrity.

Designed as an OEM replacement, it meets Suzuki's stringent engineering standards for durability and compatibility. Installation requires no modifications, ensuring a direct replacement solution for maintenance or repair tasks. The part number GS1000 is also referenced for cross-referencing in parts catalogs.

This genuine Suzuki balancer part, part number 55411-47001, is designed for compatibility with select Suzuki models including the GN125, GS55, GS450, GS1100, and GS750. Manufactured by Suzuki as an Original Equipment Manufacturer (OEM) component, it ensures precise fitment and reliable performance for engine balancing applications.

The balancer operates as a critical component in the engine's rotational dynamics, mitigating vibrations and improving overall drivetrain smoothness. This new old stock (NOS) part maintains factory specifications, providing durability and operational consistency. Ideal for restoration projects or routine maintenance, it is a direct replacement for the original equipment.