Cylinder Head

Precision-engineered guide valve for Suzuki engines, designed to meet OEM specifications and ensure optimal performance. Constructed from high-grade materials, this component delivers reliable operation under demanding conditions.

Key attributes include a 0S:0.3 configuration, allowing seamless integration with existing engine assemblies. The part’s robust build enhances durability and extends service life, while its precise tolerances guarantee consistent fluid flow and pressure regulation.

The 09381-10004 snap ring, also known as a circlip retaining ring, is a genuine Suzuki component designed for precise fit and reliable performance in original equipment applications. Manufactured to meet Suzuki engineering standards, this non‑OEM (NOS) part ensures secure axial positioning of shafts and housings, preventing unwanted movement and wear.

Constructed from high‑strength spring steel, the snap ring provides consistent tension and durability under demanding operating conditions. It is supplied individually, allowing for straightforward replacement during maintenance or repair procedures. This retaining ring is an essential element for technicians seeking to restore or maintain the integrity of Suzuki mechanical assemblies.

The New OEM Suzuki Pin 09206-08001 is a precision-engineered component designed to meet the exacting standards of Suzuki vehicle assemblies. Constructed from high‑grade materials, this pin ensures reliable performance and long‑term durability under typical operating conditions.

Its dimensions and tolerances conform to the original equipment manufacturer specifications, providing a seamless fit for the intended applications. The pin is supplied as a single unit, ready for immediate installation by qualified technicians.

The Suzuki DR100 OEM head gasket, part number 11141-05210, is a direct replacement component designed for optimal engine sealing performance. Constructed from high-grade multi-layer steel, this gasket ensures superior durability and heat resistance, maintaining critical pressure retention in the DR100 engine system. Its precision-engineered design aligns with Suzuki’s factory specifications for seamless installation and long-term reliability.

This gasket meets strict OEM quality standards, providing a precise fitment for Suzuki DR100 models. Ideal for routine maintenance, performance upgrades, or engine rebuilds, it delivers consistent sealing under high thermal and mechanical stresses. Compatible with standard engine configurations, the DR100 head gasket guarantees leak-free operation and enhanced engine longevity.

OEM SUZUKI DOWEL PIN (QTY 2) (04211-11169) RMZ, LT, ALT, DRZ, LTZ, TM, RM AHRMA

This NOS (New Old Stock) Suzuki Quad Engine Stud Kit is designed for select Suzuki ATV models, including the ALT125, LT250 Quadsport, and DR125. Each kit includes 2 high-quality studs (part number 01421-06255) to ensure precise engine assembly and secure component attachment. Engineered for durability, these studs meet or exceed OEM specifications for a reliable fit and long-lasting performance.

Compatible with the listed Suzuki models, this stud kit is ideal for restoration projects, maintenance, or replacement needs. The studs are manufactured with precision threading to ensure proper torque and prevent loosening over time. Packaged in a protective sleeve, these studs are ready for immediate installation, providing a seamless solution for ATV engine assembly.

This NOS (New Old Stock) genuine Suzuki gasket set is precision-engineered for select GV and GS series motorcycle models. The set includes two identical gasket assemblies designed to ensure optimal sealing performance in critical engine components. Manufactured to OEM specifications, these gaskets provide reliable durability and compatibility with the specified Suzuki engines.

Ideal for engine rebuilds, repairs, or maintenance, the gasket set is part of Suzuki’s official parts lineup, designated by part number 09168-06015. The gaskets are constructed from high-quality composite materials, engineered to withstand the demands of high-performance motorcycle applications. Ensure a perfect fit and long-lasting performance with this authentic replacement gasket set.

This genuine Suzuki OEM cylinder head rubber pad, part number 11151-45000, is designed for optimal sealing performance in compatible engine models. Engineered from high-quality rubber material, it delivers reliable durability and resistance to heat and compression, ensuring a secure fit and preventing leaks during operation.

Precision-manufactured to OEM specifications, this rubber pad maintains precise dimensions and surface finish integrity. It is a critical component for maintaining proper cylinder head alignment and preventing oil or coolant leaks in the engine assembly. Compatible with select Suzuki models, this replacement part meets strict industry standards for fit, function, and longevity.

This NOS cylinder head nut set includes six high-quality replacement nuts designed for Suzuki motorcycle cylinder head applications. Constructed from durable steel and featuring a precise thread pitch, these nuts are engineered to meet or exceed OEM specifications for optimal fitment and performance.

The set is specifically designed for compatibility with Suzuki models requiring part number 09159-08029. Each nut is manufactured to tight tolerances to ensure proper torque retention and resistance to vibration, reducing the risk of loosening over time. Ideal for maintenance, rebuilds, or upgrades, this kit provides a reliable solution for securing cylinder heads in high-performance or stock configurations.

New OEM Suzuki 09160-08039 Washer NOS

The **OEM Suzuki 09160-08053 Cylinder Head Washer** is a high-quality, factory-matched gasket designed for precise sealing performance in Suzuki engines. This **2-piece set** ensures optimal compatibility with original equipment specifications, providing reliable heat resistance and durability under high-pressure conditions.

Engineered for professional mechanics and DIY enthusiasts, this washer delivers consistent compression and leak prevention. Compatible with select Suzuki models, it adheres to strict OEM standards for long-term engine integrity. Each washer is manufactured to exacting tolerances, ensuring a secure fit and minimal risk of failure.

This OEM Suzuki Copper Crush Gasket, part number 09168-08012, is designed for precise engine sealing applications. Engineered to meet original equipment manufacturer standards, it ensures optimal performance and durability in high-temperature environments. The copper construction provides superior resistance to compression, heat, and pressure, maintaining a reliable seal between engine components.

The package includes 2 gaskets, ensuring you have a complete set for installation. Suitable for applications requiring a robust sealing solution, this gasket is ideal for maintenance or repair tasks where reliability is critical. Stocked as new old stock (NOS), it retains factory-level quality and compatibility with Suzuki engines.

This genuine NOS Suzuki inspection cap is designed for direct fitment on select DR-series motorcycle models. Compatible with the 1982-1984 DR125 and 1983-1984 DR100, as well as the 1978-1979 DR370, this cap ensures proper sealing and component protection for critical engine areas.

Manufactured to OEM specifications, the inspection cap features durable construction for reliable performance under standard operating conditions. It is identified by the part number 11175-32400, guaranteeing compatibility with Suzuki's exacting standards for these models.

The Suzuki OEM O‑Ring 09280‑30001 is a precision‑engineered sealing component designed for original equipment applications. Manufactured to meet Suzuki's exacting standards, this O‑Ring ensures reliable leak protection in high‑stress environments.

Constructed from durable material, the part provides consistent performance throughout its service life. It is supplied as a single unit (Qty 1) and is compatible with Suzuki models that specify part number 09280‑30001.

Suzuki PLUG,CAM SHAFT 09241-22002 OEM NEW

The Suzuki Tachometer Gear Sleeve Hole Plug, part number 26442-45000-000, is a high-quality, genuine OEM replacement component designed for precise integration with compatible Suzuki models. Engineered to factory specifications, this plug ensures optimal fitment and reliable performance in the tachometer gear sleeve hole assembly.

Manufactured to meet OEM standards, this new genuine part guarantees durability and consistent functionality. Its precision-machined design maintains proper gear alignment, reducing the risk of premature wear or operational inefficiencies. Ideal for routine maintenance or corrective replacements, this plug delivers the exacting quality required for seamless compatibility with Suzuki powertrain systems.

Precision-engineered Suzuki tachometer socket plate (Part No. 26449-33000) ensures accurate speedometer signal transmission for compatible GS-series motorcycle models. Constructed from durable steel with a corrosion-resistant finish, this replacement component maintains optimal performance in demanding riding conditions.

Designed for direct fitment, the socket plate facilitates seamless integration with GS 550, 750, 400, 500, 850, 1000, 1100, and other compatible Suzuki models. Engineered to OEM specifications, it guarantees reliable mechanical and electrical compatibility, restoring factory-level functionality to the speedometer system.

The Suzuki Genuine Camshaft Seal Band (Part No. 26451-45000) is an OEM-quality sealing component designed for precise camshaft interface applications. This seal band ensures proper lubrication retention and prevents oil leakage in high-performance engine systems, maintaining optimal operating conditions for durability and efficiency.

Constructed from high-grade materials, the seal band is engineered to meet Suzuki's stringent manufacturing standards, ensuring compatibility with specified engine models. It is recommended for use in replacement scenarios where OEM specifications are required for peak performance and longevity.

This NOS (New Old Stock) Suzuki screw, part number 09128-05101, is a precision-engineered fastener designed for compatibility with select Suzuki motorcycle models manufactured up to 2006. The screw features a standard 5mm diameter and a 12mm length, ensuring precise fitment in applications requiring this specific metric threading and dimension.

Constructed from high-grade steel, this screw offers reliable tensile strength and corrosion resistance. Its NOS status guarantees original manufacturer specifications, making it suitable for restoration projects, repairs, or replacements where OEM-grade components are required. Compatible with GT, GS, GN, GR, TS, SP, LT, MT, and other Suzuki models produced during the specified period.

This original equipment manufacturer (OEM) O-ring kit from Suzuki provides a direct replacement solution for GV1400 models, ensuring precise fitment and optimal sealing performance. Engineered to meet original equipment standards, the kit includes high-quality materials designed for durability and long-term reliability in demanding operating conditions.

Manufactured with strict adherence to Suzuki's specifications, the O-ring kit (Part No. 09280-32006) is recommended for use in GV1400 applications requiring maintenance or repair of sealing components. The kit's design and materials ensure consistent performance, preventing fluid leakage and maintaining system integrity.

This NOSA genuine Suzuki gasket set is engineered for the DR100 and SP100 models, ensuring precise fitment and high durability. Designed to meet or exceed OEM specifications, the set provides reliable sealing for critical engine components.

Includes all necessary gaskets for complete engine reassembly, including cylinder head, crankcase, and transmission covers. Compatible with Suzuki DR100 models manufactured with part number 11400-05870, this set is ideal for restoration, maintenance, or repair projects.