Crankcase Cover

The Suzuki Circlip 08331-41289 is a precision component designed for reliable performance in automotive applications. Constructed from high-quality alloy steel, it offers exceptional resistance to wear and fatigue, ensuring consistent operation under demanding conditions.

This circlip is engineered for optimal fit within specified mounting systems, providing secure retention of rotating parts. Its design incorporates a smooth, rounded profile to minimize stress concentrations and extend service life.

NEW OEM SUZUKI OIL FILLER PLUG DR125SE DR200SE DR350SE DR650S 09259-20019

OEM original equipment manufacturer (OEM) bearing designed for Suzuki models produced between 1970 and 2000, including TC100, Blazer, L‑TF250, VZ800, and TC90. Engineered to meet factory specifications, this bearing ensures reliable performance and durability for critical drivetrain applications.

Constructed from high‑quality steel, the bearing provides precise tolerance and smooth operation under demanding conditions. It is a direct replacement for part number 09262‑12001, offering a seamless fit without the need for modifications.

Suzuki Genuine RIGHT SIDE CLUTCH COVER LENS OIL LEVEL SITE GLASS 11971-33210

The Suzuki OEM Part 09280-33004 O‑Ring is engineered to meet the exacting standards of original equipment manufacturers. Constructed from high‑quality material, it provides reliable sealing performance for a variety of Suzuki applications.

Designed for precision fit, this O‑Ring ensures consistent compression and resistance to wear, contributing to the longevity and efficiency of the system in which it is installed. It is an essential component for maintaining optimal operation and preventing fluid leakage.

The Suzuki PIN 9x14 04211-09149 is an original equipment manufacturer (OEM) component designed to meet the exacting standards of Suzuki vehicles. Engineered for precise fit and reliable performance, this part ensures seamless integration with the intended application.

Constructed from high‑quality materials, the PIN offers durability and consistent operation under normal operating conditions. It is supplied as a new, unused unit, ready for immediate installation by qualified technicians.

Designed for Suzuki DRZ400, LTZ400, LTR450, and DR650 models, this OEM crank hole plug delivers reliable protection for the crankshaft assembly. Constructed from high‑grade alloy, it offers enhanced durability and precise fitment, ensuring optimal performance and longevity under demanding operational conditions.

The Suzuki LTR450 Top Dead Center (TDC) timing plug, part number 09248-14012, is engineered to provide precise ignition timing for high-performance applications. Constructed with durable materials and finished in a distinctive blue hue, this component ensures reliable operation under demanding conditions.

Designed as a direct replacement for original equipment, the plug integrates seamlessly with the LTR450 engine, facilitating accurate TDC detection and optimal combustion efficiency. Its robust construction minimizes wear, extending service intervals and maintaining peak performance.

The Suzuki BOLT 01547-0625A is an original equipment manufacturer (OEM) component designed to meet the rigorous standards of Suzuki motorcycles. Engineered for precise fit and reliable performance, this part ensures seamless integration with the vehicle's existing systems, maintaining the integrity of the original design.

Manufactured to exacting tolerances, the BOLT 01547-0625A provides durability under typical operating conditions, offering resistance to wear and corrosion. Installation follows standard procedures outlined in the Suzuki service manual, allowing technicians to replace the component efficiently and restore optimal functionality.

Suzuki OEM Part 01547-0630A SCREW

The Suzuki OEM part 01547-0645A is a precision‑engineered bolt designed for right‑hand installation on specified Suzuki models. Manufactured to meet original equipment manufacturer standards, this component ensures reliable fastening and long‑term durability under normal operating conditions.

Constructed from high‑strength material, the bolt provides consistent torque resistance and maintains structural integrity throughout the vehicle's service life. It is intended for use as a direct replacement for the original part, facilitating straightforward installation without the need for additional modifications.

The Suzuki BOLT 01547-0635A is an original equipment manufacturer (OEM) component designed specifically for Suzuki motorcycles. Engineered to meet the exact standards of the factory, this part ensures reliable performance and seamless integration with existing systems.

Constructed from high‑quality materials, the BOLT provides durable operation under typical riding conditions. Installation follows standard procedures, allowing for straightforward replacement without the need for specialized tools.

The OEM Suzuki Bolt part number 01547-0620A is engineered to meet original equipment manufacturer standards for durability and performance. This component is designed specifically for Suzuki applications, ensuring precise fit and reliable operation within the vehicle's system.

Constructed from high-quality materials, the part offers resistance to wear and environmental factors, contributing to the longevity of the vehicle. Installation follows standard Suzuki service procedures, allowing for straightforward replacement or upgrade by qualified technicians.

This OEM gear shift cover gasket is engineered specifically for the Suzuki DR650SE model years 1994 through 2023. Constructed from high‑quality, oil‑resistant material, it provides a reliable seal to prevent leakage and protect the shift mechanism from contaminants.

Designed to match the original equipment specifications, the gasket offers precise fitment and easy installation, ensuring optimal performance and longevity of the gear shift assembly. It is an essential replacement part for maintaining the durability and reliability of the motorcycle.

The Suzuki 11371-12D30 OEM Gear Shift Cover is engineered to provide a precise fit for the designated gear shift assembly. Constructed from high‑strength materials, it delivers durable protection against wear and environmental contaminants while maintaining the integrity of the original design.

Installation is straightforward, requiring no modification to the existing gear shift mechanism. The cover preserves the aesthetic and functional characteristics of the original equipment, ensuring seamless integration with the vehicle’s interior components.

The Suzuki OEM Part 11340-32E00 Clutch Cover is engineered to provide a precise fit for the original clutch assembly. Constructed from high‑strength alloy, it offers superior durability and resistance to thermal cycling, ensuring consistent performance under high load conditions.

Designed for seamless integration, the cover features a streamlined profile that minimizes airflow disruption and maintains optimal clutch operation. Its robust construction protects critical components from debris and wear, extending the service life of the clutch system.

This clutch cover gasket is engineered specifically for the Suzuki DR650SE model range spanning years 1996 through 2025. Constructed from high‑temperature resistant material, it provides a reliable seal between the clutch housing and cover, preventing oil leakage and maintaining optimal clutch performance.

Designed to meet OEM specifications, the gasket ensures precise fitment and durability under demanding riding conditions. Installation requires removal of the clutch cover and replacement of the existing gasket, after which torque specifications should be observed according to the motorcycle service manual.

The New Genuine Suzuki DR650SE Magneto Cover & Gasket SET 11351-32E01 & 11483-32E00 provides a precise replacement for the magneto cover and gasket on the Suzuki DR650SE motorcycle. Designed to match the original equipment specifications, this set ensures a proper seal and reliable magneto function during operation.

Installation is straightforward, allowing technicians to replace the magneto cover and gasket with confidence. The set is manufactured to Suzuki’s exacting standards, guaranteeing compatibility and long‑term durability on the DR650SE platform.

The Caltric Stator Gasket is engineered for the Suzuki 11483-32E00 magneto stator cover, providing a reliable seal to protect the stator assembly from contaminants and moisture. Constructed from high‑temperature resistant material, the gasket maintains its integrity under the demanding conditions of motorcycle operation.

Designed for precise fit and easy installation, this gasket ensures optimal performance of the magneto system while reducing the risk of premature wear. It is an essential replacement component for maintenance and repair of Suzuki motorcycles that utilize the specified stator cover model.

Designed exclusively for the 2023 Suzuki DR650S, this OEM front sprocket cover guard delivers superior protection against debris and road hazards. The guard is engineered to fit the DR650SE model with precision, ensuring a seamless installation that preserves the motorcycle’s aesthetic integrity.

Constructed from high‑strength, impact‑resistant material, the guard resists corrosion and wear, extending the service life of the sprocket assembly. The design incorporates streamlined ventilation channels, maintaining optimal airflow to the drivetrain while maintaining structural rigidity.