Rear Swinging Arm Rm125m

This OEM-grade 12mm flat washer from Suzuki is designed for precise fitment in NOS applications across compatible motorcycle models. Machined from durable steel, it ensures consistent performance under high-pressure conditions while maintaining optimal seal integrity.

Manufactured to original equipment specifications, this washer is optimized for durability and resistance to deformation. Suitable for GSX-R1100, GSX-R600, LT250, and LT500 models, it delivers reliable performance in NOS kits and other high-stress applications.

These NOS (New Old Stock) Genuine Suzuki Motorcycle Factory Hardware Washers are precision OEM parts designed to meet exacting manufacturing standards. Each washer is manufactured to Suzuki’s original specifications, ensuring optimal fit, function, and durability for compatible motorcycle models. These washers are intended for use in critical assembly points where a secure, reliable seal is required to maintain structural integrity and prevent loosening over time.

Each package contains two washers, designated by the part number 08322-01127. These genuine OEM components are ideal for routine maintenance, aftermarket repairs, or restoration projects, providing a direct OE replacement solution. Installation requires no special tools beyond standard hardware equipment.

Genuine Suzuki O-ring gasket, part number 09280-24003, engineered for precise sealing performance in the Burgman Quadsport engine. Designed to maintain optimal compression and prevent oil leakage, this gasket ensures reliable operation under standard operating conditions. Constructed from high-quality materials for durability and resistance to heat and pressure.

Replaces worn or damaged gaskets to restore engine integrity and efficiency. Compatible with specific Suzuki Burgman Quadsport models as specified by the manufacturer. Installation requires basic mechanical tools and familiarity with engine components.

Genuine Suzuki Original Equipment Manufacturer (OEM) bolt designed for compatibility with multiple Suzuki motorcycle models produced between 1968 and 1998. This bolt is part of the stock assembly, ensuring precise fitment and reliable performance for restoration, repair, or customization projects.

Suitable for ALT125, LT125, GT380, GT550, T500, and TC125 models, this OEM part maintains factory specifications for optimal durability and functionality. The bolt is marked with the Suzuki part number 01500-06127, verifying its authenticity and compatibility. Ideal for technicians and enthusiasts seeking high-quality, manufacturer-grade components for Suzuki motorcycles.

This original equipment manufacturer (OEM) chain roller is designed for Suzuki RM models, including the RM370, RM400, RM100, and RM125. Engineered to precise factory specifications, it ensures optimal alignment and reduced wear on the drive chain, enhancing drivetrain efficiency and durability. Constructed from high-quality materials, the roller is resistant to abrasion and maintains consistent performance under varying riding conditions.

The part is identified by the OEM part number 61345-41100 and is a direct replacement for factory components. It is recommended for use in applications where reliability and adherence to original equipment standards are critical. Compatibility is confirmed with the listed Suzuki RM models, ensuring a seamless fit and function.

This genuine Suzuki OEM spacer, part number 09180-06067, is designed for precise fitment and optimal performance in compatible Suzuki vehicle models. Engineered to exact OEM specifications, it ensures seamless integration with factory components, maintaining the integrity and reliability of the vehicle's drivetrain or mounting system.

Each spacer is manufactured from high-grade materials to withstand mechanical stress and environmental conditions. The steel construction provides durability, while the precision-machined surface guarantees accurate alignment. This OEM-grade component is ideal for applications requiring exact spacing or clearance adjustments, ensuring smooth operation and reduced risk of premature wear.

This genuine Suzuki OEM washer, part number 09160-06127, is precision-engineered for optimal fitment and durability in automotive applications. Manufactured to Suzuki's stringent quality standards, this washer ensures reliable performance and long-lasting protection against fasteners subject to vibration and stress.

With precise dimensions of 6.5mm inner diameter, 14mm outer diameter, and 2.3mm thickness, this flat washer is designed for use with compatible Suzuki components. Ideal for maintenance, repairs, or OEM replacements, it maintains the integrity of the assembly while providing a stable load-bearing surface.

This genuine NOS (New Old Stock) washer set is designed for specific Suzuki motorcycle models, ensuring precise compatibility and optimal performance. The set includes two washers, part number 09160-06017, with dimensions of 6.5 x 13 x 2.3 mm for accurate installation in the designated models.

These washers are intended for use in Suzuki RM60 (1979–1983) and RM80 (1978–1981) motorcycles, where they serve as critical components in the bike's mechanical assembly. The washers are manufactured to original equipment standards, providing reliable durability and a precise fit. Each washer in the set is designed to meet the specifications required for OEM replacement or restoration projects.

This genuine Suzuki lock washer is designed as an original equipment manufacturer (OEM) replacement part for select Suzuki motorcycle models. Engineered to exacting specifications, it ensures proper torque retention and secure fastening of critical components. The washer is constructed from high-quality steel, providing durability and resistance to vibration-induced loosening.

This particular model is compatible with the TS400, TS185, GT250, and GSXR750 series. The part numbers 08321-21068 and 08321-01067 correspond to the specific lock washer variants required for these applications. Installation is straightforward with standard tools, maintaining factory-level performance and reliability.

This Suzuki OEM NOS genuine original motorcycle bolt, part number 01500-06167, is designed as a direct replacement for vintage models requiring precise specifications. Constructed from durable steel, this bolt ensures reliable performance and longevity in high-stress applications.

Engineered to meet Suzuki's strict quality standards, this NOS bolt retains the original fit and function of the manufacturer's specifications. It is ideal for restoration projects, maintenance, or aftermarket customization where authenticity and precision are critical.

This genuine Suzuki OEM E-Clip, part number 08310-00067, is an original factory component designed for direct replacement in compatible Suzuki motorcycle and ATV models. Manufactured to Suzuki's stringent quality standards, the clip ensures secure retention of critical components, preventing loosening or misalignment during operation.

Key specifications: The clip is constructed from high-grade steel for durability and corrosion resistance. It features a precise 8.0 mm outer diameter and a 3.0 mm inner diameter, optimized for use with 3.0 mm diameter shafts. Packaged in a sealed protective sleeve for safe storage and transport.

Suzuki Washer 09160-06007 is a high-quality engine component designed for precise fitment and reliable performance in compatible Suzuki models. Engineered with durable materials, this washer ensures optimal sealing and vibration resistance in critical engine applications.

This washer is manufactured to meet original equipment standards, providing consistent dimensions and material composition for long-lasting durability. It is intended for use in applications where precise torque retention and leak prevention are required, such as cylinder head bolts and other high-stress engine connections.

This genuine OEM rear shock bolt set from Suzuki is designed for RM models 100, 125, 250, 370, and 400, ensuring precise fitment and durability for off-road and motocross applications. The high-quality steel construction meets OEM standards, providing reliable performance and resistance to wear under high-stress conditions.

The bolts are supplied as a complete set for easy replacement, with part number 09100-10096. Each bolt in the set features a hex head design for secure fastening using standard tools, maintaining optimal suspension alignment. Ideal for maintenance or repair, this genuine Suzuki component guarantees compatibility with compatible RM models, delivering consistent and dependable operation.

The Suzuki BOLT 10X 40 OEM Gasket Kit (Part No. 09100-10184) provides essential sealing components for the cylinder head, cylinder base, and crankcase of compatible Suzuki BOLT 10X 40 models. Engineered to OEM specifications, this gasket kit ensures optimal performance and leak prevention in the engine assembly.

Designed for precision fitment, the kit includes high-quality materials to withstand the demands of motorcycle engine operation. Each gasket is manufactured to meet exacting standards, ensuring durability and efficient sealing under operating conditions. Ideal for installation during engine rebuilds or routine maintenance, this replacement gasket kit restores factory-level performance.

NOS Suzuki Washer Kit provides precision-engineered washers for ALT125 and ALT185 models produced between 1983 and 1985. Designed to meet or exceed OEM specifications, these washers ensure optimal component alignment, secure fastening, and reduced vibration in critical engine and transmission applications.

Supplied as a quantity of 2 washers, part number 08322-11108, this kit includes high-quality steel washers engineered for durability and consistent performance. Ideal for restoration projects, routine maintenance, or replacement of worn components, these washers deliver reliable fitment and long-term reliability.

This genuine OEM Suzuki lock washer kit is designed for reliable fastening in critical engine and transmission applications. The kit includes part numbers 08321-01107 and 08321-21108, ensuring perfect fitment for compatible Suzuki models including the AS100, AC100, GT250, TS250, and RE5. Precision-manufactured from high-quality carbon steel, these lock washers provide consistent torque retention and vibration resistance to prevent loosening over time.

These new old stock (NOS) components are recommended for routine maintenance or repair projects requiring authentic Suzuki parts. The lock washers maintain original equipment specifications, delivering durable performance in high-stress engine environments. Ideal for professional mechanics and motorcycle restoration specialists seeking reliable, OEM-grade fasteners.

This genuine OEM Suzuki NOS clip, part number 09385-10001, is an essential component for maintaining optimal performance in your Suzuki vehicle's Nitrous Oxide System. Engineered to exact OEM specifications, this clip ensures secure and leak-free connections within the NOS system, enhancing reliability and efficiency during operation.

Designed for direct fitment, this NOS clip eliminates the need for aftermarket alternatives and guarantees compatibility with Suzuki models equipped with Nitrous Oxide systems. Its durable construction and precise engineering contribute to consistent performance and longevity, making it a reliable choice for both routine maintenance and performance upgrades.

Genuine OEM SUZUKI dual seat pin clip spring connector ensures secure and reliable attachment of seat components. Engineered with high-grade materials for durability, this NOS (New Old Stock) connector maintains factory specifications for seamless integration with compatible Suzuki models. Precision-molded design guarantees proper fitment and resistance to vibration, reducing the risk of loosening or detachment over time.

Designed as a direct replacement part, this connector maintains OEM quality standards without compromising performance. The 09385-10005 model number ensures compatibility with specific Suzuki applications, providing a dependable solution for repairs or maintenance. Corrosion-resistant coating enhances longevity, making it an ideal choice for both professional technicians and DIY enthusiasts seeking authentic parts.

This OEM genuine Suzuki bolt, part number 09111-08013, is engineered for precision fitment in RV90, RV125, RM60, and RM50 models. Designed to meet original equipment manufacturer (OEM) specifications, it ensures reliable performance and durability in critical applications where component integrity is essential.

Manufactured to exacting standards, this bolt features a threaded design optimized for secure fastening in engine and transmission assemblies. Compatible with multiple Suzuki motorcycle models, it guarantees a precise match for bolt holes and torque requirements, reducing the risk of mechanical failure. Ideal for maintenance, repair, or replacement projects, this bolt maintains the high-quality standards expected from Suzuki OEM parts.

This genuine Suzuki lock washer, part number 08321-21088, is designed for precision fitment in SUZUKI motorcycles, including the TS125, GT380, TS185, and GSXR1100 models. Constructed from high-grade steel, it ensures reliable torque retention and prevents loosening under vibration, maintaining optimal safety and performance.

As an original equipment manufacturer (OEM) new old stock (NOS) component, this lock washer meets Suzuki’s stringent quality standards. It is engineered to exact specifications for seamless compatibility with associated fasteners. Packaged individually, it offers a direct replacement solution for restoring secure fastening in critical engine and chassis applications.

Genuine OEM Suzuki RM series bolt assembly designed for RM50, RM60, RM80, RM100, and RM125 models. Part number 09111-08015 ensures direct fitment and factory-quality performance. This bolt assembly is manufactured to Suzuki's strict OEM specifications, guaranteeing durability and precise compatibility with the specified RM models.

Ideal for restoration, repair, or maintenance of Suzuki RM motocross bikes. The bolt assembly is constructed from high-grade steel to withstand the mechanical stresses of off-road riding. Ensure proper torque application (10.8-13.5 Nm) during installation for optimal performance and longevity.