Transmission

This NEW GENUINE SUZUKI 09300-20033 BUSH 1ST DRIVEN TRANSMISSION is an original equipment manufacturer (OEM) part designed for precise fitment and long-lasting durability in Suzuki vehicles. Manufactured to Suzuki's stringent quality standards, this transmission bush ensures smooth operation of the first driven gear within the transmission system.

Constructed from high-grade materials, the bush resists wear and tear under normal operating conditions. It is engineered to maintain proper gear alignment and reduce friction between moving components, contributing to overall drivetrain efficiency. The part is fully compatible with OEM specifications, providing a reliable replacement for worn or damaged components.

This original equipment manufacturer (OEM) bearing, part number 08113-62030, is designed for Suzuki applications and has been superseded by part number 09262-17023. It conforms to Suzuki's stringent quality standards and provides reliable performance in demanding environments.

Engineered for precise fit and long‑lasting durability, this bearing is suitable for replacement or maintenance of compatible Suzuki models. It offers the same dimensions and load capacities as the original component, ensuring seamless integration without the need for modifications.

This genuine Suzuki OEM bearing, part number 09262-17027, is designed for left-hand applications and ensures precise mechanical performance in compatible Suzuki models. Constructed with high-grade steel, the bearing features a robust single-row deep groove design, providing reliable durability under demanding conditions.

With an inner diameter of 17mm, an outer diameter of 40mm, and a width of 12mm, this bearing meets strict OEM specifications for load capacity and rotational efficiency. Its precision-engineered dimensions ensure optimal fitment and smooth operation, reducing wear and extending service life in critical drivetrain or wheel hub applications.

Suzuki OEM Part 24332-24510 BUSH, DRIVEN GEAR

Suzuki OEM Part 09167-25016 WASHER,LOCK (25.5X35X1)

Suzuki Circlip T TS C M RM GT LT VL VZ VS VL LS GSX GSF DR Boulevard 09380-25003

This Suzuki OEM part 09300-25020 is a precision‑engineered bush designed to meet the original equipment specifications for Suzuki vehicles. Constructed from high‑grade material, it provides reliable wear resistance and dimensional stability under typical operating conditions.

The component is intended for direct replacement of the original bush, ensuring proper fit and function within the designated assembly. Installation should follow the manufacturer’s service guidelines to maintain optimal performance and safety.

Suzuki OEM Part 09111-06039 BOLT (6X13)

The OEM Suzuki 09167-25012 lock washers are precision‑engineered components designed for reliable fastening in automotive and industrial applications. Manufactured to meet Suzuki's original equipment standards, each washer provides consistent tension and prevents bolt rotation under vibration.

Supplied as a pair, these lock washers ensure optimal performance and durability for maintenance, repair, or replacement tasks. Their design offers secure locking action while maintaining compatibility with the specified Suzuki part number.

This genuine Suzuki OEM Chain Assembly (Part No. 27600-43B20-096) delivers reliable power transmission for compatible Suzuki models. Engineered to original equipment manufacturer specifications, the chain assembly ensures precise fitment and durable performance under demanding riding conditions.

Constructed with a 520-series chain and 96-link configuration, this drive chain provides optimal strength-to-weight ratio for efficient power transfer. The pre-stretched and heat-treated rollers and pins enhance wear resistance and longevity, meeting Suzuki's stringent quality standards for aftermarket replacement components.

This OEM Suzuki shim, part number 09181-17195, is designed as a direct replacement for the original component. Engineered to meet Suzuki's stringent quality standards, it ensures proper fit and reliable performance in the intended application.

The part is supplied individually and is suitable for professional technicians and DIY enthusiasts seeking a precise, factory‑grade solution. Installation follows standard procedures outlined in the vehicle service manual.

The New OEM Suzuki Shim 09181-20195 is a precision-engineered washer designed for first-drive applications. Manufactured to meet Suzuki’s stringent quality standards, this component ensures reliable performance and extended service life in automotive systems.

Engineered for durability, the shim provides optimal contact pressure and maintains alignment under operating conditions. Its compatibility with Suzuki platforms guarantees seamless integration and simplifies maintenance procedures for professional technicians.

The New OEM Suzuki Screw 09126-06011 is a precision-engineered fastener designed to meet the exacting standards of Suzuki equipment maintenance and assembly. Manufactured to OEM specifications, this screw ensures optimal fit and reliable performance in its designated applications.

Constructed from high-quality material, the screw provides durability and resistance to wear, contributing to the longevity of the assembled components. Its design facilitates straightforward installation, reducing assembly time while maintaining secure fastening.

The **OEM Suzuki Shim 09181-25139** is a precision-engineered component designed for direct compatibility with select Suzuki vehicle models. Crafted to exacting standards, this shim ensures optimal performance and reliability in suspension systems.

**Key Features & Specifications:** - **Part Number:** 09181-25139 - **Material:** High-quality steel, engineered for durability and longevity - **Application:** Direct OEM replacement for qualifying Suzuki models - **Compatibility:** Confirmed fit for specified applications (verify model compatibility prior to purchase) Engineered to maintain factory specifications, this shim delivers consistent performance under varying operational conditions. Ideal for professional mechanics and DIY enthusiasts seeking an authentic replacement solution.

The SUZUKI washer model 09181-25167 is engineered for reliable sealing performance on a range of SUZUKI motorcycles, including the LTZ 400, LT‑A400, LT‑A500, DR650, SV650, and DL650. Constructed from high‑grade materials, this component provides durable resistance to wear and environmental exposure, ensuring long‑term functionality in demanding riding conditions.

Designed to meet OEM specifications, the washer delivers precise fit and consistent compression, facilitating proper assembly and optimal operation of the associated systems. It is an essential replacement part for maintenance and repair procedures, supporting the vehicle’s overall reliability and safety.

OEM Suzuki 24741-05G00 Counter Shaft Retainer NOS is a direct-fit replacement part designed for precise compatibility with select Suzuki models. Engineered to meet OEM specifications, this retainer ensures optimal performance and durability in transmission assemblies by securely positioning the counter shaft.

Constructed from high-grade materials, the retainer is manufactured to withstand mechanical stress and resist wear. The part is non-returned stock (NOS) and has not been previously installed, guaranteeing original condition and reliability. Compatible with specific Suzuki transmissions, this retainer is essential for maintaining proper gear alignment and reducing vibration during operation.

This high-quality reverse idle shaft (Part #24551-05G00) is engineered specifically for Suzuki Quad Sport 400 models produced between 2002 and 2014. Designed to ensure optimal engine performance, this replacement part maintains compatibility with stock specifications, delivering reliable functionality for off-road and recreational use.

The idle shaft assembly is precision-machined to meet OEM standards, ensuring a seamless fit and durable operation. This component is essential for maintaining smooth idle control, contributing to consistent throttle response and overall engine efficiency. Ideal for repairs or upgrades, this part guarantees the longevity and performance of your Suzuki Quad Sport 400.

This genuine Suzuki OEM part, designated by part number 24562-05G00, is the reverse idle gear bush designed for precise fitment and long-lasting durability in compatible Suzuki models. Engineered to exacting OEM specifications, this component ensures smooth operation of the reverse idle gear assembly, maintaining optimal performance and reducing wear on related drivetrain components.

The reverse idle gear bush functions as a critical interface between the reverse idle gear and its housing, providing stable rotational support and minimizing lateral movement. Constructed from high-quality materials, this bush meets Suzuki's stringent durability standards, offering reliable performance under normal operating conditions. Replacement of worn or damaged bushings is essential to prevent excessive play, gear misalignment, and potential damage to adjacent transmission components.

This genuine Suzuki OEM Drive Shaft, part number 24130-07G00, is engineered for precise fitment and optimal performance in compatible Suzuki models. Manufactured to Suzuki's stringent quality standards, this drive shaft ensures reliable power transmission from the transmission to the wheels, maintaining drivetrain integrity and vehicle stability.

Constructed from high-grade alloy steel, the drive shaft is designed to withstand rigorous operating conditions while providing long-lasting durability. It features precision-machined splines for smooth engagement with the transmission and differential, minimizing vibration and noise. This OEM replacement part guarantees seamless integration with Suzuki's engineering specifications, ensuring factory-level performance and safety.

This high-quality Suzuki OEM Part 24311-07G00 gear is a precision-engineered component designed for optimal performance in compatible vehicle transmissions. Manufactured to exacting OEM specifications, it ensures seamless integration and reliable operation, maintaining the integrity of the drivetrain system.

Designed for durability and precise power transmission, this 1st driven gear meets or exceeds original equipment standards. It is intended for direct replacement in applications requiring part number 24311-07G00, ensuring compatibility and minimizing installation complications.

This genuine Suzuki OEM Reverse Driven Gear (Part Number: 24571-07G01) is engineered for precise fitment and optimal performance in compatible Suzuki vehicle models. Manufactured to meet Suzuki's strict quality standards, this component ensures smooth gear engagement and reliable transmission operation under demanding conditions.

Designed for durability, the gear is constructed from high-strength alloy steel, providing exceptional wear resistance and extended service life. Compatible with specified Suzuki transmissions, it maintains OEM specifications for seamless integration and peak drivetrain efficiency.

This genuine OEM Suzuki Reverse Gear Dog, part number 24581-07G00, is a critical component for maintaining proper reverse gear functionality in compatible Suzuki transmissions. Engineered to exacting OEM standards, this reverse gear dog ensures smooth engagement and reliable operation under standard driving conditions.

Designed for precision fitment, this part integrates seamlessly with the corresponding transmission assembly. It is manufactured from high-grade alloy materials to provide durability and resistance to wear. This reverse gear dog is intended for use in specified Suzuki models and is not intended for aftermarket or non-compatible applications.

The Suzuki 09262-25125 ball bearing is engineered for high‑performance applications requiring a durable, rubber‑sealed unit. Designed with an open one‑side configuration, it facilitates easy installation and maintenance while maintaining a robust seal against contaminants.

Dimensions of 25 mm outer diameter, 62 mm width, and 17 mm inner diameter provide a compact yet powerful solution suitable for a variety of mechanical systems. The rubber seal ensures protection against dust, moisture, and other environmental factors, extending operational life and reducing the need for frequent replacements.

This OEM-quality drive shaft oil seal is designed specifically for Suzuki LT-Z400 models produced between 2003 and 2013, including the LTZ400 QuadSport 400. Precision-engineered to ensure a perfect fit and reliable performance, it effectively prevents lubricant leakage while maintaining optimal power transfer between the transmission and rear axle. Compatible with the drive shaft assembly, this seal is an essential component for maintaining the integrity of the drivetrain system.

Manufactured to meet or exceed original equipment specifications, the oil seal is constructed from high-grade rubber and metal to deliver durability under demanding off-road conditions. The part number 09283-25086 is a direct replacement, ensuring seamless integration with the vehicle's existing components. Regular inspection and timely replacement of worn seals are recommended to enhance drivetrain longevity and prevent potential damage from fluid loss.

Suzuki OEM Part 24751-07G00 RETAINER, DRIVE SHAFT OIL SEAL is a precision-engineered sealing component designed for direct fitment in Suzuki vehicle drive shaft systems. Manufactured to OEM specifications, this oil seal ensures optimal protection against fluid leakage while maintaining shaft alignment and reducing wear on critical drivetrain components.

Constructed from high-grade elastomeric materials, the seal provides superior resistance to heat, oil, and mechanical stress. Its reinforced steel casing enhances structural integrity, ensuring long-lasting performance in demanding automotive applications. Compatibility includes select Suzuki models equipped with the corresponding drive shaft configuration.

This genuine Suzuki OEM screw, part number 09126-06007, is designed for secure fastening in critical applications requiring precision and reliability. The 6x14mm metric specification ensures compatibility with a wide range of Suzuki components, maintaining factory-grade performance and durability. Constructed from high-strength steel, this screw resists corrosion and mechanical stress while delivering consistent torque retention.

As an original equipment manufacturer component, this screw meets Suzuki’s stringent quality standards, ensuring a perfect fit for repairs or replacements. Ideal for mechanical assemblies, engine components, or structural applications, it provides OEM-level reliability without compromise. The zinc-plated finish enhances corrosion resistance, extending the service life of the fastener in demanding conditions.

This genuine Suzuki OEM reverse idle gear (Part #24561-07G00) is designed specifically for models manufactured between 2003 and 2013. It ensures smooth and reliable operation of the reverse idle system on the Suzuki QuadSport 400 ATV. Precision-engineered to meet original equipment standards, this reverse idle gear guarantees optimal performance and longevity.

Compatible with Suzuki QuadSport 400 models, this reverse idle gear maintains factory specifications for seamless integration. Constructed from durable materials, it is engineered to withstand the demands of off-road riding while delivering consistent performance. Installation requires standard tools and follows OEM procedures for a straightforward replacement process.

This genuine Suzuki OEM washer, part number 09181-17021, is designed specifically for the reverse idle gear assembly in compatible Suzuki models. Engineered to meet Suzuki's exacting standards, this washer ensures optimal performance and longevity in high-torque applications.

Manufactured from premium-grade steel, the washer features precise dimensional tolerances to maintain proper clearance and prevent premature wear. It is supplied as a direct replacement part, guaranteeing a precise fit and seamless integration with the reverse idle gear mechanism. This component is essential for maintaining the reliability and efficiency of the drivetrain system.

This high-quality Suzuki OEM wave washer, part number 09164-22011, is designed for precision fit and durability in automotive applications. Manufactured to original equipment specifications, it ensures proper clamping force and vibration resistance for secure fastening in critical assemblies.

Constructed from corrosion-resistant steel with a hardened finish, this washer provides long-lasting performance under demanding conditions. Its optimized wave design enhances load distribution, reducing the risk of loosening due to dynamic stresses. Ideal for use in steering, suspension, and drivetrain components where reliability is essential.

The Caltric Front Drive Chain Sprocket is precision-engineered for Suzuki models requiring part number 27511-07G00. This sprocket features 14 teeth, ensuring optimal alignment and performance with compatible drive chains. Constructed from high-grade steel, it delivers durability under high-torque applications while maintaining precise engagement with the chain for smooth power transmission.

Designed for OE (Original Equipment) fitment, this sprocket guarantees direct replacement compatibility, eliminating the need for modifications. Its hardened surface resists wear and extends service life, making it a cost-effective upgrade for both stock and performance-oriented setups. The 14-tooth configuration is optimized for stock gear ratios, preserving factory performance characteristics.

This genuine Suzuki OEM Sprocket Retaining Plate, part number 27512-07G00, is designed for precision fitment in select Suzuki models. Engineered to meet OEM specifications, it ensures compatibility and reliability for critical drivetrain applications.

The retaining plate features a durable construction optimized for high-stress environments, providing secure fastening for sprocket assembly. Direct replacement for worn or damaged units, this component maintains original equipment standards for consistent performance and longevity.

This genuine Suzuki OEM joint set, part number 27620-43B20, is engineered for precise fitment and optimal performance in compatible Suzuki models. Designed to meet or exceed OEM specifications, this joint set ensures reliable durability and smooth operation in demanding driving conditions.

The joint set includes all necessary components for installation, including bearings, seals, and hardware, providing a complete solution for suspension or drivetrain applications. Manufactured to exacting standards, this OEM part guarantees consistent quality and compatibility with Suzuki vehicles, ensuring long-term reliability and reduced maintenance costs.

This genuine Suzuki 2nd Drive Gear (Part #24221-33H00) is precision-engineered for compatibility with select Quad Sport models produced between 2009 and 2013. Designed to meet OEM specifications, it ensures reliable power transfer to the rear axle, maintaining optimal drivetrain performance. The gear features a 1.8-inch (NT:18) diameter and is crafted from high-strength steel for durability under heavy loads and off-road conditions.

Installation requires basic mechanical expertise and alignment with the manufacturer's torque specifications. Compatible with models equipped with the NT:18 drive system, this replacement gear eliminates premature wear and noise issues, restoring smooth operation to the drivetrain. Backed by Suzuki's quality assurance, it is an essential component for maintaining vehicle integrity and performance.

This genuine OEM 4th drive gear (NT:23, part #24241-33H00) is designed for Suzuki Quad Sport 400 models manufactured between 2009 and 2013. Precision-engineered to meet Suzuki's original equipment specifications, this drive gear ensures optimal performance and durability for your ATV. The NT:23 designation corresponds to the gear's specific tooth count and compatibility with the vehicle's transmission system.

Constructed from high-grade alloy steel, this 4th drive gear delivers reliable power transfer to the rear wheels, maintaining smooth operation under standard driving conditions. Installation requires the removal of the transmission case and alignment with the output shaft, ensuring a direct OEM fitment. This component is manufactured to exacting tolerances for consistent performance and longevity.

Genuine OEM 5th drive gear for the Suzuki QuadSport 400 ATVs manufactured between 2009 and 2013. This NT:26 specification gear, part number 24251-33H00, ensures precise power transfer and optimized performance for off-road applications. Designed to meet Suzuki's strict engineering standards, it delivers reliable durability and seamless compatibility with the vehicle's drivetrain.

Constructed from high-grade steel, this 5th drive gear maintains optimal gear ratio alignment for improved acceleration and sustained high-speed operation. The component is precision-machined to exact tolerances, ensuring smooth engagement and reduced wear on related transmission parts. Suitable for both stock and performance-modified models, it provides a direct replacement solution for original equipment replacement or aftermarket upgrades.

This genuine OEM 2nd driven gear (Part #24321-33H00) is precision-engineered for the Suzuki QuadSport 400 ATV models produced between 2009 and 2013. Designed to exacting Suzuki specifications, the gear ensures optimal power transmission and durability, maintaining the performance integrity of the drivetrain. Constructed from high-grade steel, this component delivers reliable operation under heavy loads and varied terrain conditions.

The gear features a direct-fit design, eliminating the need for modifications during installation. It meets or exceeds original equipment manufacturer (OEM) quality standards, providing a seamless replacement solution for worn or damaged drivetrain components. Compatible exclusively with QuadSport 400 models from the specified model years, this part ensures precise alignment and smooth engagement within the transmission system.

This genuine Suzuki OEM Gear, part number 24331-33H00, is designed for the third driven assembly in compatible models. Manufactured to Suzuki's strict quality standards, this component ensures smooth and reliable transmission performance.

As an original equipment replacement part, it maintains the exact specifications and fitment required for seamless integration with your Suzuki vehicle's drivetrain system. This gear is essential for maintaining optimal gear ratios and efficient power transfer in the transmission assembly.

The Suzuki Quad Sport 400 4th Driven Gear NT:23 (Part #24341-33H00) is a precision-engineered component designed for optimal performance in Suzuki Quad Sport 400 models manufactured between 2009 and 2013. Crafted for durability and seamless integration, this driven gear ensures smooth power transmission and enhanced drivability in off-road conditions. Its high-strength construction resists wear, reducing maintenance requirements while extending the lifespan of the drivetrain system.

Compatible with OEM specifications, the gear features a direct-fit design for hassle-free installation. Engineered to meet Suzuki's strict quality standards, it maintains precise gear ratios to preserve the quad's original performance characteristics. Ideal for riders seeking reliable upgrades or replacements, this driven gear delivers consistent power delivery and improved handling across varied terrain.

This genuine OEM 5th driven gear (Part No. 24351-33H00) is specifically designed for select Suzuki QuadSport 400 models produced between 2009 and 2013. Precision-engineered to meet original equipment manufacturer (OEM) specifications, it ensures optimal power transfer and durability in demanding off-road conditions.

Constructed from high-quality alloy steel, the gear features a hardened surface for superior wear resistance and extended service life. Compatible with models featuring NT:22 gearing, this component maintains precise alignment and reduces drivetrain stress, enhancing overall vehicle performance.

This genuine Suzuki OEM Gear, part number 24231-33H10, is precision-engineered for the 3rd drive assembly in compatible Suzuki models. Manufactured to original equipment specifications, it ensures optimal performance and durability, maintaining factory-level precision in gear mesh and load-bearing capacity.

The gear is designed for direct replacement in applications requiring a 3rd drive component, delivering smooth power transfer and consistent engagement. As an OEM part, it meets Suzuki's stringent quality standards for material composition, heat treatment, and dimensional accuracy, ensuring long-term reliability under standard operating conditions.