Transmission

This high-quality transmission driveshaft circlip is designed for Suzuki LT500R Quadracer models manufactured between 1987 and 1990. Precision-engineered to exact OEM specifications, it ensures reliable securement of the driveshaft within the transmission assembly, preventing axial movement and maintaining optimal drivetrain performance.

Manufactured from durable high-grade steel, this circlip meets or exceeds original equipment standards for strength and wear resistance. The part number 09380-28008 corresponds directly to Suzuki's specified component, guaranteeing proper fitment and compatibility with all applicable LT500R models produced during the specified production years.

This is a genuine OEM Suzuki factory bushing (Part No. 09301-28001) designed for the Suzuki GS and GSX-RF motorcycle models. Engineered to exacting Suzuki specifications, this bushing ensures precise fitment and optimal performance in the suspension system. Constructed from high-quality materials, it provides durable wear resistance and reliable structural integrity for long-term service.

This bushing is a direct replacement for the original equipment component, meeting all factory standards for fit, function, and material composition. It is ideal for routine maintenance, repair, or restoration projects requiring authentic Suzuki parts. Installation requires standard motorcycle tools and follows standard OEM procedures.

This genuine Suzuki Transmission Lock Washer, part number 09167-28001, is engineered to meet OEM standards for precise fit and performance in Suzuki transmissions. Designed as a critical component for secure fastening, this lock washer helps prevent loosening under vibrational stress, ensuring long-term reliability in automatic and manual transmissions. Each lock washer is manufactured from high-strength, corrosion-resistant steel to withstand demanding operating conditions and maintain optimal torque retention over time.

Sold as a lot of 12 units, this pack provides a cost-effective solution for repair shops, mechanics, and DIY enthusiasts requiring multiple replacements. Compatible with select Suzuki models, this washer is ideal for routine maintenance or transmission rebuilds where adherence to manufacturer specifications is essential. Always verify vehicle compatibility before installation to ensure proper function and warranty adherence.

This high-quality Suzuki transmission circlip, part number 08331-31286, is engineered for precise fitment across a wide range of Suzuki motorcycle models manufactured between 1987 and 2022. Designed as a critical component for transmission assembly, it ensures secure retention of internal gears, minimizing axial movement and maintaining optimal performance under operational stress.

Manufactured to OEM specifications, this circlip guarantees durability and reliability, meeting stringent quality control standards. Its robust construction resists wear and deformation, providing long-lasting functionality in demanding riding conditions. Ideal for both OEM replacements and aftermarket service applications, it is a cost-effective solution for maintaining transmission integrity.

Suzuki OEM Part 09390-62012 C-RING

Suzuki OIL SEAL 09285-20006 OEM NEW

This OEM replacement part is a direct-fit screw designed for specific Suzuki models. Manufactured to original equipment manufacturer standards, it ensures precise fitment and reliable performance in critical applications. The screw is constructed from high-grade steel to provide durability and resistance to wear under standard operating conditions.

Compatible with a range of Suzuki vehicles, this screw meets or exceeds OEM specifications for torque, threading, and material composition. It is recommended for use in maintenance and repair scenarios where original part integrity is essential. Packaged individually for convenience, this new part is ready for immediate installation.

This OEM Suzuki screw, part number 02122-06167, is precision-engineered for optimal performance in compatible Suzuki models. Manufactured to exacting OEM standards, it ensures reliable fastening with a durable 6mm diameter and 16mm length. Supplied as a new old stock (NOS) component, it maintains original equipment specifications for seamless integration and longevity.

Designed for specific Suzuki applications, this screw delivers consistent torque retention and resistance to vibration, minimizing the risk of loosening under operational stress. Ideal for repair, maintenance, or replacement in original equipment configurations where genuine parts are required.

New OEM Suzuki 04221-07129 Pin 7x12 NOS

Engineered for optimal performance, the Suzuki OEM Part 24312-02F00 BUSH is designed to fit the 1st driven gear assembly. This component is manufactured to meet Suzuki’s stringent quality standards, ensuring durability and reliability in demanding operating conditions.

Installation of this OEM replacement guarantees precise alignment and smooth operation of the gear system. The part is compatible with the specified Suzuki models and is manufactured from high‑grade materials to resist wear and maintain structural integrity over extended service life.

This genuine OEM Suzuki bushing is precision-engineered for models produced between 1986 and 1992 (GSX-R1100) and 1997 to 1998 (TL1000). Manufactured to exacting Suzuki specifications, it ensures optimal fitment and durability for suspension and steering components. The bushing is produced as part of original equipment production, guaranteeing consistency with factory standards for performance and longevity.

Designed to restore factory-level handling and stability, this part is ideal for restoration projects or replacing worn bushings in high-performance applications. Each bushing is identified by the OEM part number 09300-22005, ensuring compatibility with the specified Suzuki models.

Designed to meet the rigorous standards of automotive maintenance, this OEM washer delivers reliable performance and durability. Constructed with high‑grade materials, it is engineered for long‑term use in demanding environments.

This genuine Suzuki Thrust Washer, part number 08211-20341, is an OEM factory-original component designed for precision-engineered performance in compatible Suzuki models. Manufactured to meet rigorous OEM standards, this thrust washer ensures optimal engine component alignment and reduced friction for enhanced durability and efficiency.

The washer is constructed from high-quality metal alloys, providing superior resistance to wear and deformation under operational stress. Its precise dimensions and tolerance specifications are engineered to match original equipment manufacturer (OEM) requirements, guaranteeing seamless integration with Suzuki engines. This part is recommended for routine maintenance or replacements to maintain engine integrity and performance.

Suzuki OEM Part 09181-22223 WASHER, LH (22X34X1.0)

This genuine Suzuki BUSH, 2ND DRIVEN GR is an original equipment manufacturer (OEM) replacement component designed for optimal compatibility and performance in compatible Suzuki models. The part number 09300-28002 ensures precise fitment for maintaining drivetrain integrity and reducing wear in the second driven gear assembly.

Manufactured to Suzuki's stringent quality standards, this bushing provides reliable durability and smooth operation under standard operating conditions. It is recommended for replacement during scheduled maintenance or when signs of excessive wear or failure are observed. Compatibility is confirmed for specific Suzuki vehicle applications as indicated by the OEM part number.

This genuine Suzuki washer (part number 09181-28195) is engineered for precise alignment and reliable performance in critical applications. Constructed from durable steel with a protective coating, it ensures long-lasting resistance to corrosion and wear. The washer features a flat design with a precise outer diameter of 19.8 mm and an inner diameter of 9.0 mm, delivering optimal fitment for Suzuki components.

Designed for OEM compatibility, this washer meets Suzuki’s stringent engineering standards, providing consistent clamping force and vibration resistance. Ideal for use in automotive assemblies where precision and durability are paramount.

This genuine Suzuki OEM PIN 04221-07209 is a high-quality replacement component designed for precise fitment and optimal performance in compatible Suzuki vehicles. Manufactured to exact OEM specifications, it ensures seamless integration with the vehicle's systems, maintaining factory-level reliability and functionality. The part is brand-new and packaged in original Suzuki protective packaging, guaranteeing authenticity and protection from shipping damage.

Engineered for durability and long-lasting performance, this PIN is an essential component for maintaining the integrity of your Suzuki's assembly. It is recommended for use in approved applications where this specific part number is specified. Always verify vehicle compatibility before installation to ensure proper function and safety.

High‑performance ball transmission bearing designed for Suzuki engines. The bearing features a 28 mm inner diameter, 70 mm outer diameter, and 18 mm width, providing reliable load distribution and reduced friction in the drivetrain.

Constructed from precision‑machined steel, the bearing offers durability and consistent performance under varying operating conditions. It is compatible with a range of models requiring the 28x70x18 specification, ensuring a straightforward replacement for OEM applications.

The 09390-70001 SUZUKI OEM C RING is a high‑performance component designed for precise fitment within Suzuki engine assemblies. Constructed from durable alloy, it delivers reliable sealing and optimal torque retention under demanding operating conditions.

Installation requires standard assembly procedures and is compatible with the original Suzuki OEM specifications. This C RING provides a critical sealing function, ensuring engine efficiency and longevity while maintaining strict adherence to manufacturer tolerances.

The drive shaft oil seal is engineered for precise fitment on Suzuki 93-05 models, including GSXR600, GSXR750, 01-06 GSXR1000, and OEM 09283-36008. The seal offers reliable containment of lubricating oil, maintaining optimal engine performance and preventing contamination.

Genuine Suzuki Original Equipment Manufacturer (OEM) bolt designed for compatibility with multiple Suzuki motorcycle models produced between 1968 and 1998. This bolt is part of the stock assembly, ensuring precise fitment and reliable performance for restoration, repair, or customization projects.

Suitable for ALT125, LT125, GT380, GT550, T500, and TC125 models, this OEM part maintains factory specifications for optimal durability and functionality. The bolt is marked with the Suzuki part number 01500-06127, verifying its authenticity and compatibility. Ideal for technicians and enthusiasts seeking high-quality, manufacturer-grade components for Suzuki motorcycles.

SUZUKI FRONT SPROCKET NUT (FITS MANY MODELS) 09159-20004 OEM GENUINE

This Suzuki OEM Joint Set (Part #27620-24F20) is engineered for optimal durability and precise fitment in compatible Suzuki models. Manufactured to Suzuki’s stringent quality standards, this joint set delivers reliable performance under demanding driving conditions.

Designed for direct replacement, the set ensures seamless integration with the vehicle’s steering or suspension system. Each component is precision-engineered to meet original equipment specifications, maintaining manufacturer-approved tolerances for long-term reliability and safety. Ideal for professional repairs or routine maintenance, this OEM part guarantees a perfect match and eliminates concerns about aftermarket fitment issues.

The Suzuki Washer (part number 08212-06222) is a precision-engineered component designed to ensure optimal sealing performance in high-torque applications. Crafted from durable carbon steel, this washer provides superior structural integrity while resisting deformation under mechanical stress. Its precise dimensions and consistent material composition make it an essential part in maintaining the reliability of Suzuki engine and drivetrain systems.

The washer measures 12.7 mm in outer diameter, with an inner diameter of 7.9 mm and a thickness of 1.6 mm. It is equipped with a standard AS568A 904 size O-ring groove, ensuring compatibility with compatible sealing systems. Designed for use in automotive powertrain applications, this washer meets or exceeds manufacturer specifications for dimensional accuracy and mechanical performance.